Benjamin Herrenschmidt wrote:
Yes you're right. Early at the pci initialization are errors of the allocation
for pi ressources.
And that are exactly the ressources failing later, so that pci initialization
seem to be the reason for my problem.
Was there any simple solution (e.g. just somehow increase memory reserved for
pci) when you came across that issue Johan ?
Hrm... I was expecting to see a lot more output here, make sure you have
"debug" on your command line (or enable early debug output, same
effect).
There is nothing more even with debug in kernel command line.
But I added some printk's around the resource handling to get a better feeling
what's happening.
I attached the new extended bootlog and the patch with the printk's for a
better understanding where which message is printed.
I tried to understand how I might e.g. increase the number of available
resources or their size, but unfortunately that is not the simplest code when
working with it the first time ;-)
Cheers,
Ben.
For comparison I defined DEBUG in the good kernel (arch=ppc) and that is what
the initialization prints (pci ...:0a:1 is the secondary head of the same
graphic card an it's not an issue if thats not allocated):
good case:
PCI: Probing PCI hardware
PCI: bridge rsrc 0..ffff (100), parent c0354624
PCI: bridge rsrc 80000000..8fffffff (200), parent c0354608
PCI:0000:00:0a.0: Resource 0: 0000000088000000-000000008fffffff (f=1208)
PCI:0000:00:0a.0: Resource 1: 000000000000ff00-000000000000ffff (f=101)
PCI:0000:00:0a.0: Resource 2: 0000000087ff0000-0000000087ffffff (f=200)
PCI:0000:00:0a.1: Resource 0: 0000000078000000-000000007fffffff (f=1208)
PCI: Cannot allocate resource region 0 of device 0000:00:0a.1
PCI:0000:00:0a.1: Resource 1: 0000000077ff0000-0000000077ffffff (f=200)
PCI: Cannot allocate resource region 1 of device 0000:00:0a.1
PCI: Failed to allocate mem resource #0:[EMAIL PROTECTED] for 0000:00:0a.1
--
Grüsse / regards,
Christian Ehrhardt
IBM Linux Technology Center, Open Virtualization
PCI host bridge /plb/[EMAIL PROTECTED] (primary) ranges:
MEM 0x0000000180000000..0x000000018fffffff -> 0x0000000080000000
IO 0x00000001e8000000..0x00000001e80fffff -> 0x0000000000000000
4xx PCI DMA offset set to 0x00000000
PCI: Probing PCI hardware
PCI: Hiding 4xx host bridge resources 0000:00:00.0
Try to map irq for 0000:00:00.0...
-> got one, spec 2 cells (0x00000003 0x00000008...) on /interrupt-controller2
-> mapped to linux irq 16
Try to map irq for 0000:00:0a.0...
-> got one, spec 2 cells (0x00000003 0x00000008...) on /interrupt-controller2
-> mapped to linux irq 16
Try to map irq for 0000:00:0a.1...
PCI: PHB (bus 0) bridge rsrc 0: 0000000000000000-00000000000fffff [0x100],
parent c0365060 (PCI IO)
__request_resource - request cf8045b0 name '/plb/[EMAIL PROTECTED]' start 0x0
end 0x0
__request_resource - no conflict parent c0365060 sibling 00000000
PCI: PHB (bus 0) bridge rsrc 1: 0000000180000000-000000018fffffff [0x200],
parent c0365038 (PCI mem)
__request_resource - request cf8045d8 name '/plb/[EMAIL PROTECTED]' start 0x1
end 0x80000000
__request_resource - no conflict parent c0365038 sibling 00000000
PCI: Assigning unassigned resouces...
pci_assign_resource - allocate with IORESOURCE_PREFETCH
pci_bus_alloc_resource - enter
pci_assign_resource - second pci_bus_alloc_resource call
pci_bus_alloc_resource - enter
pci_bus_alloc_resource - call allocate ressource size 0 startcalc 134217728,
align -1
find_resource - size 0, min 0x8000000, max 0x1
find_resource - found start 0x1 end 0x80000000
__request_resource - request cf810578 name '0000:00:0a.0' start 0x1 end
0x80000000
__request_resource - no conflict parent cf8045d8 sibling 00000000
pci_assign_resource - allocate with IORESOURCE_PREFETCH
pci_bus_alloc_resource - enter
pci_assign_resource - second pci_bus_alloc_resource call
pci_bus_alloc_resource - enter
pci_bus_alloc_resource - call allocate ressource size 0 startcalc 134217728,
align -1
find_resource - size 0, min 0x8000000, max 0x1
find_resource - continue with start 0x1 on 88000000
find_resource - found start 0x1 end 0x88000000
__request_resource - request cf810178 name '0000:00:0a.1' start 0x1 end
0x88000000
__request_resource - no conflict parent cf8045d8 sibling 00000000
pci_assign_resource - allocate with IORESOURCE_PREFETCH
pci_bus_alloc_resource - enter
pci_assign_resource - second pci_bus_alloc_resource call
pci_bus_alloc_resource - enter
pci_bus_alloc_resource - call allocate ressource size 0 startcalc 131072, align
-1
find_resource - size 0, min 0x20000, max 0x1
find_resource - continue with start 0x1 on 88000000
find_resource - continue with start 0x1 on 90000000
find_resource - no this - exit
PCI: pci_assign_resource - Failed to allocate mem resource #6:[EMAIL PROTECTED]
for 0000:00:0a.0
pci_assign_resource - allocate with IORESOURCE_PREFETCH
pci_bus_alloc_resource - enter
pci_bus_alloc_resource - call allocate ressource size 0 startcalc 65536, align
-1
find_resource - size 0, min 0x10000, max 0x1
find_resource - continue with start 0x1 on 88000000
find_resource - continue with start 0x1 on 90000000
find_resource - no this - exit
PCI: pci_assign_resource - Failed to allocate mem resource #2:[EMAIL PROTECTED]
for 0000:00:0a.0
pci_assign_resource - allocate with IORESOURCE_PREFETCH
pci_bus_alloc_resource - enter
pci_bus_alloc_resource - call allocate ressource size 0 startcalc 65536, align
-1
find_resource - size 0, min 0x10000, max 0x1
find_resource - continue with start 0x1 on 88000000
find_resource - continue with start 0x1 on 90000000
find_resource - no this - exit
PCI: pci_assign_resource - Failed to allocate mem resource #1:[EMAIL PROTECTED]
for 0000:00:0a.1
pci_assign_resource - allocate with IORESOURCE_PREFETCH
pci_bus_alloc_resource - enter
pci_bus_alloc_resource - call allocate ressource size 0 startcalc 256, align -1
find_resource - size 0, min 0x100, max 0x0
find_resource - found start 0x0 end 0x1000
__request_resource - request cf8105a0 name '0000:00:0a.0' start 0x0 end 0x1000
__request_resource - no conflict parent cf8045b0 sibling 00000000
SCSI subsystem initialized
[...]
radeonfb_pci_register BEGIN
radeonfb_pci_register - resource0 0x1 - 0x80000000
radeonfb_pci_register - resource1 0x0 - 0x1000
radeonfb_pci_register - resource2 0x0 - 0x0
radeonfb_pci_register - got pci ressources fb_base_phys 0x1 mmio_base_phys
0x80000000
__request_resource - request cf8bfd20 name 'radeonfb framebuffer' start 0x1 end
0x80000000
__request_resource - request cf8bfd20 name 'radeonfb framebuffer' start 0x1 end
0x80000000
__request_resource - request cf8bfd20 name 'radeonfb framebuffer' start 0x1 end
0x80000000
__request_resource - no conflict parent cf810578 sibling 00000000
radeonfb_pci_register - call ioremap for base 0 and size 0
__ioremap(): phys addr 0x0 is RAM lr c029df88 - mem_init_done 1 [EMAIL
PROTECTED]
radeonfb (0000:00:0a.0): cannot map MMIO
radeonfb: probe of 0000:00:0a.0 failed with error -5
Subject: [PATCH] : ! debug only ! - printk's in pci ressource handling
From: Christian Ehrhardt <[EMAIL PROTECTED]>
This defines debug for pci and put's some printk's to keep track of the pci
ressource handling. This patch is just for reference to understand the
resulting boot message log.
The patch is ugly - but for debugging only ;-)
Signed-off-by: Christian Ehrhardt <[EMAIL PROTECTED]>
---
[diffstat]
arch/powerpc/kernel/pci-common.c | 2 ++
arch/powerpc/mm/pgtable_32.c | 4 ++--
drivers/pci/bus.c | 3 +++
drivers/pci/setup-res.c | 12 ++++++++----
drivers/video/aty/radeon_base.c | 7 +++++++
drivers/video/aty/radeonfb.h | 4 ++--
kernel/resource.c | 17 ++++++++++++++++-
7 files changed, 40 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -37,6 +37,8 @@
#include <asm/machdep.h>
#include <asm/ppc-pci.h>
#include <asm/firmware.h>
+
+#define DEBUG
#ifdef DEBUG
#include <asm/udbg.h>
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -183,8 +183,8 @@ __ioremap(phys_addr_t addr, unsigned lon
* mem_init() sets high_memory so only do the check after that.
*/
if (mem_init_done && (p < virt_to_phys(high_memory))) {
- printk("__ioremap(): phys addr 0x%llx is RAM lr %p\n",
- (unsigned long long)p, __builtin_return_address(0));
+ printk("__ioremap(): phys addr 0x%llx is RAM lr %p - mem_init_done %d [EMAIL PROTECTED]",
+ (unsigned long long)p, __builtin_return_address(0), mem_init_done, virt_to_phys(high_memory));
return NULL;
}
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -42,6 +42,8 @@ pci_bus_alloc_resource(struct pci_bus *b
{
int i, ret = -ENOMEM;
+printk(KERN_ERR"%s - enter\n", __func__);
+
type_mask |= IORESOURCE_IO | IORESOURCE_MEM;
for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
@@ -59,6 +61,7 @@ pci_bus_alloc_resource(struct pci_bus *b
!(res->flags & IORESOURCE_PREFETCH))
continue;
+printk(KERN_ERR"%s - call allocate ressource size %d startcalc %d, align %d\n", __func__, size, (r->start ? : min,-1), align);
/* Ok, try it out.. */
ret = allocate_resource(r, res, size,
r->start ? : min,
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -142,10 +142,13 @@ int pci_assign_resource(struct pci_dev *
required alignment in the "start" field. */
align = (resno < PCI_BRIDGE_RESOURCES) ? size : res->start;
+printk(KERN_ERR"%s - allocate with IORESOURCE_PREFETCH\n", __func__);
+
/* First, try exact prefetching match.. */
ret = pci_bus_alloc_resource(bus, res, size, align, min,
IORESOURCE_PREFETCH,
pcibios_align_resource, dev);
+
if (ret < 0 && (res->flags & IORESOURCE_PREFETCH)) {
/*
@@ -154,13 +157,14 @@ int pci_assign_resource(struct pci_dev *
* But a prefetching area can handle a non-prefetching
* window (it will just not perform as well).
*/
+printk(KERN_ERR"%s - second pci_bus_alloc_resource call\n", __func__);
ret = pci_bus_alloc_resource(bus, res, size, align, min, 0,
pcibios_align_resource, dev);
}
if (ret) {
- printk(KERN_ERR "PCI: Failed to allocate %s resource "
- "#%d:[EMAIL PROTECTED] for %s\n",
+ printk(KERN_ERR "PCI: %s - Failed to allocate %s resource "
+ "#%d:[EMAIL PROTECTED] for %s\n", __func__,
res->flags & IORESOURCE_IO ? "I/O" : "mem",
resno, (unsigned long long)size,
(unsigned long long)res->start, pci_name(dev));
@@ -197,8 +201,8 @@ int pci_assign_resource_fixed(struct pci
}
if (ret) {
- printk(KERN_ERR "PCI: Failed to allocate %s resource "
- "#%d:[EMAIL PROTECTED] for %s\n",
+ printk(KERN_ERR "PCI: %s - Failed to allocate %s resource "
+ "#%d:[EMAIL PROTECTED] for %s\n", __func__,
res->flags & IORESOURCE_IO ? "I/O" : "mem",
resno, (unsigned long long)(res->end - res->start + 1),
(unsigned long long)res->start, pci_name(dev));
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -2160,6 +2160,10 @@ static int __devinit radeonfb_pci_regist
int ret;
RTRACE("radeonfb_pci_register BEGIN\n");
+
+printk(KERN_ERR"%s - resource0 0x%0lx - 0x%0lx\n", __func__, pdev->resource[0].start, pdev->resource[0].end);
+printk(KERN_ERR"%s - resource1 0x%0lx - 0x%0lx\n", __func__, pdev->resource[1].start, pdev->resource[1].end);
+printk(KERN_ERR"%s - resource2 0x%0lx - 0x%0lx\n", __func__, pdev->resource[2].start, pdev->resource[2].end);
/* Enable device in PCI config */
ret = pci_enable_device(pdev);
@@ -2198,6 +2202,8 @@ static int __devinit radeonfb_pci_regist
rinfo->fb_base_phys = pci_resource_start (pdev, 0);
rinfo->mmio_base_phys = pci_resource_start (pdev, 2);
+printk(KERN_ERR"%s - got pci ressources fb_base_phys 0x%0lx mmio_base_phys 0x%0lx\n", __func__,rinfo->fb_base_phys,rinfo->mmio_base_phys);
+
/* request the mem regions */
ret = pci_request_region(pdev, 0, "radeonfb framebuffer");
if (ret < 0) {
@@ -2214,6 +2220,7 @@ static int __devinit radeonfb_pci_regist
}
/* map the regions */
+printk(KERN_ERR "%s - call ioremap for base %ld and size %d\n",__func__, rinfo->mmio_base_phys, RADEON_REGSIZE);
rinfo->mmio_base = ioremap(rinfo->mmio_base_phys, RADEON_REGSIZE);
if (!rinfo->mmio_base) {
printk(KERN_ERR "radeonfb (%s): cannot map MMIO\n",
diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h
--- a/drivers/video/aty/radeonfb.h
+++ b/drivers/video/aty/radeonfb.h
@@ -287,8 +287,8 @@ struct radeonfb_info {
char name[DEVICE_NAME_SIZE];
- unsigned long mmio_base_phys;
- unsigned long fb_base_phys;
+ resource_size_t mmio_base_phys;
+ resource_size_t fb_base_phys;
void __iomem *mmio_base;
void __iomem *fb_base;
diff --git a/kernel/resource.c b/kernel/resource.c
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -152,6 +152,9 @@ static struct resource * __request_resou
resource_size_t end = new->end;
struct resource *tmp, **p;
+printk(KERN_ERR"%s - request %p name '%s' start 0x%0lx end 0x%0lx\n",
+ __func__, new, new->name, start, end);
+
if (end < start)
return root;
if (start < root->start)
@@ -165,6 +168,7 @@ static struct resource * __request_resou
new->sibling = tmp;
*p = new;
new->parent = root;
+printk(KERN_ERR"%s - no conflict parent %p sibling %p\n",__func__, new->parent, new->sibling);
return NULL;
}
p = &tmp->sibling;
@@ -305,6 +309,8 @@ static int find_resource(struct resource
{
struct resource *this = root->child;
+printk(KERN_ERR"%s - size %lx, min 0x%0lx, max 0x%0lx\n", __func__, size, min, max);
+
new->start = root->start;
/*
* Skip past an allocated resource that starts at 0, since the assignment
@@ -328,10 +334,16 @@ static int find_resource(struct resource
alignf(alignf_data, new, size, align);
if (new->start < new->end && new->end - new->start >= size - 1) {
new->end = new->start + size - 1;
+printk(KERN_ERR"%s - found start 0x%0lx end 0x%0lx\n", __func__, new->start, new->end);
return 0;
}
- if (!this)
+ if (!this) {
+printk(KERN_ERR"%s - no this - exit\n", __func__);
break;
+}
+else {
+printk(KERN_ERR"%s - continue with start 0x%0lx on %p\n", __func__, (this->end + 1), this->sibling);
+}
new->start = this->end + 1;
this = this->sibling;
}
@@ -385,6 +397,9 @@ int insert_resource(struct resource *par
{
int result;
struct resource *first, *next;
+
+printk(KERN_ERR"%s - insert %p (start 0x%0lx end 0x%0lx) under parent %p\n",
+ __func__, new, new->start, new->end, parent);
write_lock(&resource_lock);
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
