> [cross posting from one mailing list to another] > >>> is the file zImage.elf my proper network image ? >> >> What bootloader is on your board? zImage.elf *might* be the proper >> image. If you're using u-boot, then you want to build a uImage >> instead. > > I'm trying to compile u-boot with buildroot, but it fails with: > > /usr/bin/make -j1 -C > /home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc/genepy/u-boot-1.3.2 > > \ > ""_config > make[1]: Entering directory > `/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc/genepy/u-boot-1.3.2' > make[1]: *** No rule to make target `_config'. Stop. > make[1]: Leaving directory > `/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc/genepy/u-boot-1.3.2' > make: *** > [/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc/genepy/u-boot-1.3.2/.configured] > > Error 2 > > Apparently it expects a BOARD_NAME variable, but I don't know what to put in > it (I looked at the makefile and can't find the ml405 referenced in there). > -- > Guillaume Dargaud > http://www.gdargaud.net/ >
I think you need to figure out how to build u-boot for your board outside buildroot, before you try to build it inside buildroot. Best Regards Ulf Samuelsson _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
