Add the DT binding documentation for NXP MQS driver

Signed-off-by: Shengjiu Wang <shengjiu.w...@nxp.com>
---
Changes in v2
-refine the comments for properties

 .../devicetree/bindings/sound/fsl,mqs.txt     | 36 +++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/fsl,mqs.txt

diff --git a/Documentation/devicetree/bindings/sound/fsl,mqs.txt 
b/Documentation/devicetree/bindings/sound/fsl,mqs.txt
new file mode 100644
index 000000000000..40353fc30255
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,mqs.txt
@@ -0,0 +1,36 @@
+fsl,mqs audio CODEC
+
+Required properties:
+  - compatible : Must contain one of "fsl,imx6sx-mqs", "fsl,codec-mqs"
+               "fsl,imx8qm-mqs", "fsl,imx8qxp-mqs".
+  - clocks : A list of phandles + clock-specifiers, one for each entry in
+            clock-names
+  - clock-names : "mclk" - must required.
+                 "core" - required if compatible is "fsl,imx8qm-mqs", it
+                          is for register access.
+  - gpr : A phandle of General Purpose Registers in IOMUX Controller.
+         Required if compatible is "fsl,imx6sx-mqs".
+
+Required if compatible is "fsl,imx8qm-mqs":
+  - power-domains: A phandle of PM domain provider node.
+  - reg: Offset and length of the register set for the device.
+
+Example:
+
+mqs: mqs {
+       compatible = "fsl,imx6sx-mqs";
+       gpr = <&gpr>;
+       clocks = <&clks IMX6SX_CLK_SAI1>;
+       clock-names = "mclk";
+       status = "disabled";
+};
+
+mqs: mqs@59850000 {
+       compatible = "fsl,imx8qm-mqs";
+       reg = <0x59850000 0x10000>;
+       clocks = <&clk IMX8QM_AUD_MQS_IPG>,
+                <&clk IMX8QM_AUD_MQS_HMCLK>;
+       clock-names = "core", "mclk";
+       power-domains = <&pd_mqs0>;
+       status = "disabled";
+};
-- 
2.21.0

Reply via email to