Andrew Morton <a...@linux-foundation.org> writes:
> (switched to email. Please respond via emailed reply-to-all, not via the
> bugzilla web interface).
>
> On Sun, 08 Sep 2019 00:04:26 +0000 bugzilla-dae...@bugzilla.kernel.org wrote:
>
>> https://bugzilla.kernel.org/show_bug.cgi?id=204789
>>
>> Bug ID: 204789
>> Summary: Boot failure with more than 256G of memory
>> Product: Memory Management
>> Version: 2.5
>> Kernel Version: 5.2.x
>> Hardware: PPC-64
>> OS: Linux
>> Tree: Mainline
>> Status: NEW
>> Severity: high
>> Priority: P1
>> Component: Other
>> Assignee: a...@linux-foundation.org
>> Reporter: c...@neo-zeon.de
>> Regression: No
>
> "Yes" :)
>
>> Kernel series 5.2.x will not boot on my Talos II workstation with dual POWER9
>> 18 core processors and 512G of physical memory with disable_radix=yes and 4k
>> pages.
>>
>> 5.3-rc6 did not work either.
>>
>> 5.1 and earlier boot fine.
>
> Thanks. It's probably best to report this on the powerpc list, cc'ed here.
>
>> I can get the system to boot IF I leave the Radix MMU enabled or if I boot a
>> kernel with 64k pages. I haven't yet tested enabling the Radix MMU with 64k
>> pages at the same time, but I suspect this would work. This is a system I
>> cannot take down TOO frequently.
>>
>> The system will also boot with the Radix MMU disabled and 4k pages with 256G
>> or
>> less memory. Setting mem on the kernel CLI to 256G or less results in a
>> successful boot. Setting mem=257G or higher no Radix MMU and 4k pages and the
>> kernel will not boot.
>>
>> Petitboot comes up, but the system fails VERY early in boot in the serial
>> console with:
>> SIGTERM received, booting...
>> [ 23.838858] kexec_core: Starting new kernel
>>
>> Early printk is enabled, and it never progresses any further.
>>
>> 5.1 boots just fine with the Radix MMU disabled and 4k pages.
>>
>> Unfortunately, I currently need 4k pages for bcache to work, and Radix MMU
>> disabled in order for FreeBSD 12.x to work under KVM so I'm sticking with
>> 5.1.21 for now.
>>
>> I have been unable to reproduce this issue in KVM.
>>
>> Here are my PCIe peripherals:
>> 1. Microsemi/Adaptec HBA 1100-4i SAS controller
>> 2. Megaraid 9316-16i SAS RAID controller.
>>
>> I've only tried little endian as this is a little endian install.
Will you be able to bisect this? I tried 4K PAGESIZE on P8 with upstream
kernel and I can't recreate the issuue.
[root@ltc ~]# free -g
total used free shared buff/cache available
Mem: 495 0 494 0 0 493
Swap: 0 0 0
[root@ltc ~]# getconf PAGESIZE
4096
[root@ltc ~]# grep Hash /proc/cpuinfo
MMU : Hash
I will see if I can get a P9 system with largemem
-aneesh
