You can also get our support file from the http git web site and then use the default ML405 kernel configuration just as a baseline to get the kernel running. The support file has a bit stream that supports the 405 def kernel configuration.
Thanks, John -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Stephen Neuendorffer Sent: Monday, April 07, 2008 10:44 AM To: Guillaume Dargaud; linuxppc-dev@ozlabs.org Subject: RE: Booting a Xilinx board Generally, speaking the easiest way to debug such errors is to examine __log_buf using XMD. Steve > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:linuxppc-dev- > [EMAIL PROTECTED] On Behalf Of Guillaume Dargaud > Sent: Monday, April 07, 2008 8:34 AM > To: linuxppc-dev@ozlabs.org > Subject: Booting a Xilinx board > > Hello all, > sorry if this is an elementary question for most of you, but could you tell > me where I'm going wrong in trying to boot a kernel 2.6.24 on a Xilinx ml405 > board ? > > - I generate an ext2 partition with buildroot, cointaining busybox and > uclibc. > > - I copy it to my CF card: > sudo dd if=binaries/genepy/rootfs.test.ext2 of=/dev/sdc2 > > - I compile the git Xilinx kernel, with proper xparameters file from the BSP > and proper .config options to match the design, using the cross compiler > created by buildroot. > > - I generate a sysace file from that kernel and put it on the 1st partition: > xmd -tcl genace.tcl -jprog -board ml405 -target ppc_hw -hw > implementation/system.bit -elf > ~/kernels/linux-2.6.24/arch/ppc/boot/images/zImage.elf -ace Kernel26.ace > > When I boot I get the following: > > loaded at: 00400000 0050719C > board data at: 00505120 0050519C > relocated to: 00404054 004040D0 > zimage at: 00404E40 0050484E > avail ram: 00508000 08000000 > > Linux/PPC load: console=ttyS0,9600 ip=on root=/dev/sysace/disc0/part2 rw > Uncompressing Linux...done. > Now booting the kernel > > And then it stops. > I'm sure I've overlooked something obvious... > Thanks > -- > Guillaume Dargaud > http://www.gdargaud.net/ > > > _______________________________________________ > Linuxppc-dev mailing list > Linuxppc-dev@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-dev _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
