On Thu, May 23, 2019 at 8:39 AM Christophe Leroy <christophe.le...@c-s.fr> wrote: > > Salut Mathieu, > > Le 23/05/2019 à 08:24, Mathieu Malaterre a écrit : > > Salut Christophe, > > > > On Wed, May 22, 2019 at 2:20 PM Christophe Leroy > > <christophe.le...@c-s.fr> wrote: > >> > >> > >> > >> Le 22/05/2019 à 14:15, Mathieu Malaterre a écrit : > >>> Hi all, > >>> > >>> I have not boot my G4 in a while, today using master here is what I see: > >>> > >>> done > >>> Setting btext ! > >>> W=640 H=488 LB=768 addr=0x9c008000 > >>> copying OF device tree... > >>> starting device tree allocs at 01401000 > >>> otloc_up(00100000, 0013d948) > >>> trying: 0x01401000 > >>> trying: 0x01501000 > >>> -› 01501000 > >>> alloc_bottom : 01601000 > >>> alloc_top : 20000000 > >>> alloc_top_hi : 20000000 > >>> nmo_top : 20000000 > >>> ram_top : 20000000 > >>> Building dt strings... > >>> Building dt structure... > >>> reserved memory map: > >>> 00d40000 - 006c1000 > >>> Device tree strings 0x01502000 -> 0x00000007 > >>> Device tree struct 0x01503000 -> 0x00000007 > >>> Quiescing Open Firmware ... > >>> Booting Linux via __start() @ 0x001400000 > >>> ->dt_headr_start=0x01501000 > >>> > >>> Any suggestions before I start a bisect ? > >>> > >> > >> Have you tried without CONFIG_PPC_KUEP and CONFIG_PPC_KUAP ? > > > > Using locally: > > > > diff --git a/arch/powerpc/configs/g4_defconfig > > b/arch/powerpc/configs/g4_defconfig > > index 14d0376f637d..916bce8ce9c3 100644 > > --- a/arch/powerpc/configs/g4_defconfig > > +++ b/arch/powerpc/configs/g4_defconfig > > @@ -32,6 +32,8 @@ CONFIG_USERFAULTFD=y > > # CONFIG_COMPAT_BRK is not set > > CONFIG_PROFILING=y > > CONFIG_G4_CPU=y > > +# CONFIG_PPC_KUEP is not set > > +# CONFIG_PPC_KUAP is not set > > CONFIG_PANIC_TIMEOUT=0 > > # CONFIG_PPC_CHRP is not set > > CONFIG_CPU_FREQ=y > > > > > > Leads to almost the same error (some values have changed): > > Ok. > > When you say you are using 'master', what do you mean ? Can you give the > commit Id ? > > Does it boots with Kernel 5.1.4 ?
I was able to boot v5.1: $ dmesg | head [ 0.000000] printk: bootconsole [udbg0] enabled [ 0.000000] Total memory = 512MB; using 1024kB for hash table (at (ptrval)) [ 0.000000] Linux version 5.1.0+ (ma...@debian.org) (gcc version 8.3.0 (Debian 8.3.0-7)) #8 Thu May 23 06:26:38 UTC 2019 Commit id is: e93c9c99a629 (tag: v5.1) Linux 5.1 > Did you try latest powerpc/merge branch ? Will try that next. > Can you send your full .config ? Config is attached. Thanks, > Christophe > > > > > done > > Setting btext ! > > W=640 H=488 LB=768 addr=0x9c008000 > > copying OF device tree... > > starting device tree allocs at 01300000 > > alloc_up(00100000, 0013d948) > > trying: 0x01300000 > > trying: 0x01400000 > > -› 01400000 > > alloc_bottom : 01500000 > > alloc_top : 20000000 > > alloc_top_hi : 20000000 > > nmo_top : 20000000 > > ram_top : 20000000 > > Building dt strings... > > Building dt structure... > > reserved memory map: > > 00c40000 - 006c0000 > > Device tree strings 0x01401000 -> 0x00000007 > > Device tree struct 0x01402000 -> 0x00000007 > > Quiescing Open Firmware ... > > Booting Linux via __start() @ 0x001400000 > > ->dt_headr_start=0x01400000 > > > > Thanks anyway, > >
g4_defconfig
Description: Binary data
