On Sun, 2008-03-23 at 09:13 +1100, Benjamin Herrenschmidt wrote:
> On Sat, 2008-03-22 at 19:35 +0000, David Woodhouse wrote:
> > On Sat, 2008-01-26 at 12:55 +0100, Étienne Bersac wrote:
> > > From: Étienne Bersac <[EMAIL PROTECTED]>
> > >
> > > Implement a new driver named windfarm_pm121 which drive fans on PowerMac
> > > 12,1 machine : iMac G5 iSight (rev C) 17" and 20". It's based on
> > > windfarm_pm81 driver from Benjamin Herrenschmidt.
> >
> > Is it just coincidence, or does it only seem to stop the fans when I
> > cat /sys/devices/platform/windfarm.0/cpu-temp ?
>
> Is it actually working ?
>
> If the SMU thinks there is no fan control done by the OS, it will ramp
> them up ... but bring them back down when it gets ping.
>
> So if for some reason the control loop isn't starting (because it can't
> find something it wants on this machine), the fans will stay up, but
> you'll cause such a "ping" when reading the CPU temp.
Yeah, there's weird shit going on with the sensor/control registration.
I think GCC is be miscompiling it -- the sequence of
all = all && pm121_register_control(foo...);
all = all && pm121_register_control(bar...);
is bailing out as soon as 'all' gets set to zero. Despite the fact that
pm121_register_control() quite blatantly has side-effects.
--
dwmw2
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
