Hi Mark
Can this patch be accepted? Or need I do any update?
Best regards
Wang shengjiu
>
> There is very low possibility ( < 0.1% ) that channel swap happened in
> beginning when multi output/input pin is enabled. The issue is that
> hardware can't send data to correct pin in the beginning with the normal
> enable flow.
>
> This is hardware issue, but there is no errata, the workaround flow is that:
> Each time playback/recording, firstly clear the xSMA/xSMB, then enable
> TE/RE, then enable xSMB and xSMA (xSMB must be enabled before xSMA).
> Which is to use the xSMA as the trigger start register, previously the xCR_TE
> or xCR_RE is the bit for starting.
>
> Fixes commit 43d24e76b698 ("ASoC: fsl_esai: Add ESAI CPU DAI driver")
> Cc: <sta...@vger.kernel.org>
> Reviewed-by: Fabio Estevam <feste...@gmail.com>
> Acked-by: Nicolin Chen <nicoleots...@gmail.com>
> Signed-off-by: Shengjiu Wang <shengjiu.w...@nxp.com>
> ---
> sound/soc/fsl/fsl_esai.c | 47 +++++++++++++++++++++++++++++++++++++---
> -------
> 1 file changed, 37 insertions(+), 10 deletions(-)
>
> diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c index
> afe67c865330..3623aa9a6f2e 100644
> --- a/sound/soc/fsl/fsl_esai.c
> +++ b/sound/soc/fsl/fsl_esai.c
> @@ -54,6 +54,8 @@ struct fsl_esai {
> u32 fifo_depth;
> u32 slot_width;
> u32 slots;
> + u32 tx_mask;
> + u32 rx_mask;
> u32 hck_rate[2];
> u32 sck_rate[2];
> bool hck_dir[2];
> @@ -361,21 +363,13 @@ static int fsl_esai_set_dai_tdm_slot(struct
> snd_soc_dai *dai, u32 tx_mask,
> regmap_update_bits(esai_priv->regmap, REG_ESAI_TCCR,
> ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(slots));
>
> - regmap_update_bits(esai_priv->regmap, REG_ESAI_TSMA,
> - ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(tx_mask));
> - regmap_update_bits(esai_priv->regmap, REG_ESAI_TSMB,
> - ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(tx_mask));
> -
> regmap_update_bits(esai_priv->regmap, REG_ESAI_RCCR,
> ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(slots));
>
> - regmap_update_bits(esai_priv->regmap, REG_ESAI_RSMA,
> - ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(rx_mask));
> - regmap_update_bits(esai_priv->regmap, REG_ESAI_RSMB,
> - ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(rx_mask));
> -
> esai_priv->slot_width = slot_width;
> esai_priv->slots = slots;
> + esai_priv->tx_mask = tx_mask;
> + esai_priv->rx_mask = rx_mask;
>
> return 0;
> }
> @@ -596,6 +590,7 @@ static int fsl_esai_trigger(struct snd_pcm_substream
> *substream, int cmd,
> bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
> u8 i, channels = substream->runtime->channels;
> u32 pins = DIV_ROUND_UP(channels, esai_priv->slots);
> + u32 mask;
>
> switch (cmd) {
> case SNDRV_PCM_TRIGGER_START:
> @@ -608,15 +603,38 @@ static int fsl_esai_trigger(struct
> snd_pcm_substream *substream, int cmd,
> for (i = 0; tx && i < channels; i++)
> regmap_write(esai_priv->regmap, REG_ESAI_ETDR,
> 0x0);
>
> + /*
> + * When set the TE/RE in the end of enablement flow, there
> + * will be channel swap issue for multi data line case.
> + * In order to workaround this issue, we switch the bit
> + * enablement sequence to below sequence
> + * 1) clear the xSMB & xSMA: which is done in probe and
> + * stop state.
> + * 2) set TE/RE
> + * 3) set xSMB
> + * 4) set xSMA: xSMA is the last one in this flow, which
> + * will trigger esai to start.
> + */
> regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
> tx ? ESAI_xCR_TE_MASK :
> ESAI_xCR_RE_MASK,
> tx ? ESAI_xCR_TE(pins) :
> ESAI_xCR_RE(pins));
> + mask = tx ? esai_priv->tx_mask : esai_priv->rx_mask;
> +
> + regmap_update_bits(esai_priv->regmap,
> REG_ESAI_xSMB(tx),
> + ESAI_xSMB_xS_MASK,
> ESAI_xSMB_xS(mask));
> + regmap_update_bits(esai_priv->regmap,
> REG_ESAI_xSMA(tx),
> + ESAI_xSMA_xS_MASK,
> ESAI_xSMA_xS(mask));
> +
> break;
> case SNDRV_PCM_TRIGGER_SUSPEND:
> case SNDRV_PCM_TRIGGER_STOP:
> case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
> regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
> tx ? ESAI_xCR_TE_MASK :
> ESAI_xCR_RE_MASK, 0);
> + regmap_update_bits(esai_priv->regmap,
> REG_ESAI_xSMA(tx),
> + ESAI_xSMA_xS_MASK, 0);
> + regmap_update_bits(esai_priv->regmap,
> REG_ESAI_xSMB(tx),
> + ESAI_xSMB_xS_MASK, 0);
>
> /* Disable and reset FIFO */
> regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
> @@ -906,6 +924,15 @@ static int fsl_esai_probe(struct platform_device
> *pdev)
> return ret;
> }
>
> + esai_priv->tx_mask = 0xFFFFFFFF;
> + esai_priv->rx_mask = 0xFFFFFFFF;
> +
> + /* Clear the TSMA, TSMB, RSMA, RSMB */
> + regmap_write(esai_priv->regmap, REG_ESAI_TSMA, 0);
> + regmap_write(esai_priv->regmap, REG_ESAI_TSMB, 0);
> + regmap_write(esai_priv->regmap, REG_ESAI_RSMA, 0);
> + regmap_write(esai_priv->regmap, REG_ESAI_RSMB, 0);
> +
> ret = devm_snd_soc_register_component(&pdev->dev,
> &fsl_esai_component,
> &fsl_esai_dai, 1);
> if (ret) {
> --
> 1.9.1
>
> _______________________________________________
> Alsa-devel mailing list
> alsa-de...@alsa-project.org
> https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fma
> ilman.alsa-project.org%2Fmailman%2Flistinfo%2Falsa-
> devel&data=02%7C01%7Cshengjiu.wang%40nxp.com%7Ce2940159f310
> 4473866a08d69c7d6c1e%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0
> %7C636868459834438771&sdata=WdeHv2JxOBqb0mQ%2B%2FrRISAt64
> JZ6ATY2u02IzzFDaEY%3D&reserved=0
