Fix a race condition in fsl_elbc_run_command
Fix incorrect usage of clearbits32 that bashed option register
Remove work around for bashed register
Signed-off-by: Mike Hench <[EMAIL PROTECTED]>
---
--- linux-2.6.25-rc5.orig/drivers/mtd/nand/fsl_elbc_nand.c
2008-03-10 00:22:27.000000000 -0500
+++ linux-2.6.25-rc5/drivers/mtd/nand/fsl_elbc_nand.c 2008-03-19
12:34:36.000000000 -0500
@@ -379,11 +379,11 @@ static int fsl_elbc_run_command(struct m
in_be32(&lbc->fbar), in_be32(&lbc->fpar),
in_be32(&lbc->fbcr), priv->bank);
+ ctrl->irq_status = 0;
/* execute special operation */
out_be32(&lbc->lsor, priv->bank);
/* wait for FCM complete flag or timeout */
- ctrl->irq_status = 0;
wait_event_timeout(ctrl->irq_wait, ctrl->irq_status,
FCM_TIMEOUT_MSECS * HZ/1000);
ctrl->status = ctrl->irq_status;
@@ -861,7 +861,7 @@ static int fsl_elbc_chip_init_tail(struc
/* adjust Option Register and ECC to match Flash page size */
if (mtd->writesize == 512) {
priv->page_size = 0;
- clrbits32(&lbc->bank[priv->bank].or, ~OR_FCM_PGS);
+ clrbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);
} else if (mtd->writesize == 2048) {
priv->page_size = 1;
setbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);
@@ -882,11 +882,6 @@ static int fsl_elbc_chip_init_tail(struc
return -1;
}
- /* The default u-boot configuration on MPC8313ERDB causes
errors;
- * more delay is needed. This should be safe for other boards
- * as well.
- */
- setbits32(&lbc->bank[priv->bank].or, 0x70);
return 0;
}
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
