From: Paul Gortmaker <[EMAIL PROTECTED]>
The wrapper script didn't have entries for the TQM8540 board and the
SBC8548 or SBC8560 boards. I've assumed that the TQM8540 console is
8250 based and not CPM based by looking at its defconfig. There was
also a trailing * on the TQM8555 entry that I removed too.
Signed-off-by: Paul Gortmaker <[EMAIL PROTECTED]>
Signed-off-by: Grant Likely <[EMAIL PROTECTED]>
---
Paulus; this fixes the broken defconfig issues that Adrian raised. Can you
please pick this up for merger into 2.6.25?
Thanks,
g.
arch/powerpc/boot/Makefile | 4 ++--
arch/powerpc/boot/wrapper | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 4974d9e..1aded8f 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -253,8 +253,8 @@ image-$(CONFIG_TQM8540) +=
cuImage.tqm8540
image-$(CONFIG_TQM8541) += cuImage.tqm8541
image-$(CONFIG_TQM8555) += cuImage.tqm8555
image-$(CONFIG_TQM8560) += cuImage.tqm8560
-image-$(CONFIG_SBC8548) += cuImage.tqm8548
-image-$(CONFIG_SBC8560) += cuImage.tqm8560
+image-$(CONFIG_SBC8548) += cuImage.sbc8548
+image-$(CONFIG_SBC8560) += cuImage.sbc8560
# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
image-$(CONFIG_STORCENTER) += cuImage.storcenter
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index d50e498..8f8b849 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -174,10 +174,10 @@ cuboot*)
*-mpc83*)
platformo=$object/cuboot-83xx.o
;;
- *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555*)
+ *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555)
platformo=$object/cuboot-85xx-cpm2.o
;;
- *-mpc85*)
+ *-mpc85*|*-tqm8540|*-sbc85*)
platformo=$object/cuboot-85xx.o
;;
esac
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
