Hi Scott,
Oh, I did not see the in_XX64/out_XX64 supported only __powerpc64__ just now.
Thanks for your reminder.
#ifdef __powerpc64__
#ifdef __BIG_ENDIAN__
DEF_MMIO_OUT_D(out_be64, 64, std);
DEF_MMIO_IN_D(in_be64, 64, ld);
/* There is no asm instructions for 64 bits reverse loads and stores */
static inline u64 in_le64(const volatile u64 __iomem *addr)
{
return swab64(in_be64(addr));
}
static inline void out_le64(volatile u64 __iomem *addr, u64 val)
{
out_be64(addr, swab64(val));
}
#else
DEF_MMIO_OUT_D(out_le64, 64, std);
DEF_MMIO_IN_D(in_le64, 64, ld);
/* There is no asm instructions for 64 bits reverse loads and stores */
static inline u64 in_be64(const volatile u64 __iomem *addr)
{
return swab64(in_le64(addr));
}
static inline void out_be64(volatile u64 __iomem *addr, u64 val)
{
out_le64(addr, swab64(val));
}
#endif
#endif /* __powerpc64__ */
Best Regards,
Peng
>-----Original Message-----
>From: Scott Wood <o...@buserror.net>
>Sent: 2018年12月24日 12:46
>To: Peng Ma <peng...@nxp.com>; Leo Li <leoyang...@nxp.com>; Zhang Wei
><z...@zh-kernel.org>
>Cc: linuxppc-dev@lists.ozlabs.org; dmaeng...@vger.kernel.org; Wen He
><wen.h...@nxp.com>
>Subject: Re: [PATCH] dmaengine: fsldma: Add 64-bit I/O accessors for
>powerpc64
>
>On Mon, 2018-12-24 at 03:42 +0000, Peng Ma wrote:
>> Hi Scott,
>>
>> You are right, we should support powerpc64, so could I changed it as
>> fallows:
>>
>> diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h index
>> 88db939..057babf 100644
>> --- a/drivers/dma/fsldma.h
>> +++ b/drivers/dma/fsldma.h
>> @@ -202,35 +202,10 @@ struct fsldma_chan {
>> #define fsl_iowrite32(v, p) out_le32(p, v)
>> #define fsl_iowrite32be(v, p) out_be32(p, v)
>>
>> -#ifndef __powerpc64__
>> -static u64 fsl_ioread64(const u64 __iomem *addr) -{
>> - u32 fsl_addr = lower_32_bits(addr);
>> - u64 fsl_addr_hi = (u64)in_le32((u32 *)(fsl_addr + 1)) << 32;
>> -
>> - return fsl_addr_hi | in_le32((u32 *)fsl_addr);
>> -}
>> -
>> -static void fsl_iowrite64(u64 val, u64 __iomem *addr) -{
>> - out_le32((u32 __iomem *)addr + 1, val >> 32);
>> - out_le32((u32 __iomem *)addr, (u32)val);
>> -}
>> -
>> -static u64 fsl_ioread64be(const u64 __iomem *addr) -{
>> - u32 fsl_addr = lower_32_bits(addr);
>> - u64 fsl_addr_hi = (u64)in_be32((u32 *)fsl_addr) << 32;
>> -
>> - return fsl_addr_hi | in_be32((u32 *)(fsl_addr + 1));
>> -}
>> -
>> -static void fsl_iowrite64be(u64 val, u64 __iomem *addr) -{
>> - out_be32((u32 __iomem *)addr, val >> 32);
>> - out_be32((u32 __iomem *)addr + 1, (u32)val);
>> -}
>> -#endif
>> +#define fsl_ioread64(p) in_le64(p)
>> +#define fsl_ioread64be(p) in_be64(p)
>> +#define fsl_iowrite64(v, p) out_le64(p, v)
>> +#define fsl_iowrite64be(v, p) out_be64(p, v)
>> #endif
>
>Then you'll break 32-bit, assuming those fake-it-with-two-32-bit-accesses
>were actually needed.
>
>-Scott
>
