> -----Original Message-----
> From: Rob Herring <robh...@kernel.org>
> Sent: Wednesday, August 22, 2018 2:15 AM
> To: Vabhav Sharma <vabhav.sha...@nxp.com>
> Cc: linux-ker...@vger.kernel.org; devicet...@vger.kernel.org; Mark Rutland
> <mark.rutl...@arm.com>; linuxppc-dev <linuxppc-dev@lists.ozlabs.org>;
> moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE <linux-arm-
> ker...@lists.infradead.org>; Michael Turquette <mturque...@baylibre.com>;
> Stephen Boyd <sb...@kernel.org>; Rafael J. Wysocki <r...@rjwysocki.net>;
> Viresh Kumar <viresh.ku...@linaro.org>; linux-clk <linux-
> c...@vger.kernel.org>; open list:THERMAL <linux...@vger.kernel.org>; linux-
> kernel-ow...@vger.kernel.org; Catalin Marinas <catalin.mari...@arm.com>;
> Will Deacon <will.dea...@arm.com>; Greg Kroah-Hartman
> <gre...@linuxfoundation.org>; Arnd Bergmann <a...@arndb.de>; Kate
> Stewart <kstew...@linuxfoundation.org>; Masahiro Yamada
> <yamada.masah...@socionext.com>; Russell King <li...@armlinux.org.uk>;
> Varun Sethi <v.se...@nxp.com>; Udit Kumar <udit.ku...@nxp.com>;
> Priyanka Jain <priyanka.j...@nxp.com>; Sriram Dash
> <sriram.d...@nxp.com>
> Subject: Re: [PATCH 5/5] arm64: dts: add LX2160ARDB board support
>
> On Mon, Aug 20, 2018 at 1:52 PM Vabhav Sharma
> <vabhav.sha...@nxp.com> wrote:
> >
> > LX2160A reference design board (RDB) is a high-performance computing,
> > evaluation, and development platform with LX2160A SoC.
> >
> > Signed-off-by: Priyanka Jain <priyanka.j...@nxp.com>
> > Signed-off-by: Sriram Dash <sriram.d...@nxp.com>
> > Signed-off-by: Vabhav Sharma <vabhav.sha...@nxp.com>
> > ---
> > arch/arm64/boot/dts/freescale/Makefile | 1 +
> > arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 95
> > +++++++++++++++++++++++
> > 2 files changed, 96 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> >
> > diff --git a/arch/arm64/boot/dts/freescale/Makefile
> > b/arch/arm64/boot/dts/freescale/Makefile
> > index 86e18ad..445b72b 100644
> > --- a/arch/arm64/boot/dts/freescale/Makefile
> > +++ b/arch/arm64/boot/dts/freescale/Makefile
> > @@ -13,3 +13,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-
> rdb.dtb
> > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
> > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
> > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
> > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> > b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> > new file mode 100644
> > index 0000000..70fad20
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> > @@ -0,0 +1,95 @@
> > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) // // Device Tree file
> > +for LX2160ARDB // // Copyright 2018 NXP
> > +
> > +/dts-v1/;
> > +
> > +#include "fsl-lx2160a.dtsi"
> > +
> > +/ {
> > + model = "NXP Layerscape LX2160ARDB";
> > + compatible = "fsl,lx2160a-rdb", "fsl,lx2160a";
> > +
> > + aliases {
> > + crypto = &crypto;
>
> Drop this. Aliases should be numbered, and this is not a standard alias name
> either.
Ok
>
> > + serial0 = &uart0;
> > + serial1 = &uart1;
> > + serial2 = &uart2;
> > + serial3 = &uart3;
> > + };
> > + chosen {
> > + stdout-path = "serial0:115200n8";
> > + };
> > +};
> > +
> > +&uart0 {
> > + status = "okay";
> > +};
> > +
> > +&uart1 {
> > + status = "okay";
> > +};
> > +
> > +&i2c0 {
> > + status = "okay";
> > + pca9547@77 {
>
> i2c-mux@77
Sure
>
> > + compatible = "nxp,pca9547";
> > + reg = <0x77>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + i2c@2 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0x2>;
> > +
> > + ina220@40 {
power-sensor@40
> > + compatible = "ti,ina220";
> > + reg = <0x40>;
> > + shunt-resistor = <1000>;
> > + };
> > + };
> > +
> > + i2c@3 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0x3>;
> > +
> > + sa56004@4c {
>
> temperature-sensor@4c
Ok, temperature-sensor-1@4c
>
> > + compatible = "nxp,sa56004";
> > + reg = <0x4c>;
> > + };
> > +
> > + sa56004@4d {
Ok,temperature-sensor-2@4d
> > + compatible = "nxp,sa56004";
> > + reg = <0x4d>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&i2c4 {
> > + status = "okay";
> > +
> > + rtc@51 {
> > + compatible = "nxp,pcf2129";
> > + reg = <0x51>;
> > + // IRQ10_B
> > + interrupts = <0 150 0x4>;
> > + };
> > +
> > +};
> > +
> > +&usb0 {
> > + status = "okay";
> > +};
> > +
> > +&usb1 {
> > + status = "okay";
> > +};
> > +
> > +&crypto {
> > + status = "okay";
> > +};
> > --
> > 2.7.4
> >
