On Thu, Feb 21, 2008 at 01:58:18PM -0600, Kumar Gala wrote:
>
> On Feb 21, 2008, at 1:50 PM, Anton Vorontsov wrote:
>
> >Without this patch it's impossible to select ehci-fsl on PPC_MPC837x.
> >Another option would be to convert USB_EHCI_FSL to verbose bool,
> >but I presume EHCI_FSL is purposely made silent.
> >
> >Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
> >---
> >drivers/usb/host/Kconfig | 2 +-
> >1 files changed, 1 insertions(+), 1 deletions(-)
> >
> >diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> >index d97b16b..33da056 100644
> >--- a/drivers/usb/host/Kconfig
> >+++ b/drivers/usb/host/Kconfig
> >@@ -72,7 +72,7 @@ config USB_EHCI_FSL
> > bool
> > depends on USB_EHCI_HCD
> > select USB_EHCI_ROOT_HUB_TT
> >- default y if MPC834x || PPC_MPC831x
> >+ default y if MPC834x || PPC_MPC831x || PPC_MPC837x
>
> Can we just change this to FSL_SOC
Easily. But not "default y"... "depends on" instead, ok?
There are plenty of FSL chips without EHCI built-in, so with
default y we'll enable it wrongly.
- - - -
From: Anton Vorontsov <[EMAIL PROTECTED]>
Subject: [USB POWERPC] ehci-fsl: handles other freescale processors
This patch converts USB_EHCI_FSL config option into the verbose
bool, so we'll able to select it for other freescale processors
with built-in EHCI controller.
Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
---
drivers/usb/host/Kconfig | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index d97b16b..bf8be2a 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -69,10 +69,9 @@ config USB_EHCI_BIG_ENDIAN_DESC
default y
config USB_EHCI_FSL
- bool
- depends on USB_EHCI_HCD
+ bool "Support for Freescale on-chip EHCI USB controller"
+ depends on USB_EHCI_HCD && FSL_SOC
select USB_EHCI_ROOT_HUB_TT
- default y if MPC834x || PPC_MPC831x
---help---
Variation of ARC USB block used in some Freescale chips.
--
1.5.2.2
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
