Hi, Jon,
> -----Original Message-----
> From: Loeliger Jon
>
> Zhang Wei wrote:
> > Signed-off-by: Zhang Wei <[EMAIL PROTECTED]>
> > ---
> > arch/powerpc/boot/dts/mpc8641_hpcn.dts | 13 +++++++++++++
> > 1 files changed, 13 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
> b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
> > index 556a9ca..1a0fce5 100644
> > --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
> > +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
> > @@ -25,6 +25,7 @@
> > serial1 = &serial1;
> > pci0 = &pci0;
> > pci1 = &pci1;
> > + rapidio0 = &rapidio0;
> > };
> >
> > cpus {
> > @@ -499,4 +500,16 @@
> > 0 00100000>;
> > };
> > };
> > +
> > + rapidio0: [EMAIL PROTECTED] {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + compatible = "fsl,rapidio-delta";
> > + reg = <f80c0000 20000>;
> > + ranges = <0 0 c0000000 0 20000000>;
> > + interrupt-parent = <&mpic>;
> > + /* err_irq bell_outb_irq bell_inb_irq
> > + msg1_tx_irq msg1_rx_irq msg2_tx_irq
> msg2_rx_irq */
> > + interrupts = <30 2 31 2 32 2 35 2 36 2 37 2 38 2>;
> > + };
> > };
>
> The 8641 DTS file has been converted to /dts-v1/ format now.
> Please rewrite this patch with explicit hex numbers for
> addresses, even if 0x0, and decimal for IRQs.
>
Thanks! I'm dropped by fashion. :) I'll re-do them.
Cheers!
Wei.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
