On Wed, 11 Oct 2017 22:27:23 +1100
Michael Ellerman <m...@ellerman.id.au> wrote:
> Nicholas Piggin <npig...@gmail.com> writes:
>
> > On Wed, 11 Oct 2017 01:58:28 +1000
> > Nicholas Piggin <npig...@gmail.com> wrote:
> >
> >
> >> Ahh okay, pseries is using the start-cpu RTAS call to enter at
> >> generic_secondary_smp_init() as well. So we can take it out for
> >> pseries as well.
> >
> > This patch seems to do the trick for pseries guests too:
> >
> > powerpc/64s: Avoid waiting for secondary hold spinloop if it is not used
> >
> > OPAL and some RTAS boot does not insert secondaries at 0x60 to wait at
> > the secondary hold spinloop. Instead they are started later, at
> > generic_secondary_smp_init(), which is after the secondary hold
> > spinloop.
> >
> > Avoid waiting on this spinloop when booting with OPAL firmware, or
> > when the RTAS boot does not use this loop. This wait always times
> > out in those cases.
> >
> > This saves 100ms boot time on bare metal (10s of seconds of real time
> > when booting on the simulator in SMP), and 100ms on modern pseries
> > guests.
>
> My instinct was to say "huh, that's not how it works on pseries!".
>
> But then I see this was all changed in:
>
> dbe78b401186 ("powerpc/pseries: Do not start secondaries in Open Firmware")
> (Sep 2013)
>
>
> So that is where my confusion comes from. Most of the code and comments
> still talk about secondaries coming in at 0x60, but that's really only
> on "legacy" machines.
>
> I guess I can merge this, but really this code needs a proper cleanup. I
> dislike all this platform specific knowledge ending up in setup_64.c.
>
> If we had an smp_ops->spinning_secondaries() that tells the spin
> loop how many secondaries to wait for, it could all go in platform code
> I think.
Yeah, not sure how best to do it. What I wanted to do was just increment
spinning_secondaries in prom_init as we inserted them to 0x60 (or the
0x100 for pmac or whatever). But prom_init doesn't like referencing outside
variables so there goes that.
>
> The check for use_spinloop() would just become a short-circuit check of
> spinning_secondaries == 0.
Yeah maybe that would be enough. I don't know if half that setup_arch
could be per-platformirized, including smp_release_cpus().
>
> The other issue is kexec. IIRC when we kexec on pseries we don't return
> the CPUs to RTAS, so then they *are* spinning at 0x60. But maybe that's
> changed since I last looked at it too :)
Oh I might have forgotten to test that on pseries, so I'll try that.
Thanks,
Nick
