On Jan 21, 2008, at 2:49 PM, Anton Vorontsov wrote:
> On Mon, Jan 21, 2008 at 01:19:41PM -0600, Kumar Gala wrote:
>> Anton,
>>
>> it looks like the "TI AR7 CPMAC Ethernet support" uses FIXED_PHY and
>> was selecting FIXED_MII_100_FDX which is gone.
>>
>> Can you look into this. I get the following warning now:
>>
>> scripts/kconfig/conf -s arch/powerpc/Kconfig
>> drivers/net/Kconfig:1713:warning: 'select' used by config symbol
>> 'CPMAC' refers to undefined symbol 'FIXED_MII_100_FDX'
>
> Wow. I thought there were no Fixed PHY users. :-)
>
> Jeff, as you've already Acked Fixed PHY rework to go through powerpc
> tree, would you please Ack this patch in addition? I hope cpmac
> maintainer will fix remaining issues as time goes by.
>
> Thanks!
Jeff, just a reminder to look at this.
- k
> - - - -
> From: Anton Vorontsov <[EMAIL PROTECTED]>
> Subject: [PATCH] [NET] cpmac: convert to new Fixed PHY infrastructure
>
> This patch converts cpmac to the new Fixed PHY infrastructure,
> though it
> doesn't fix all the problems with that driver. I didn't even bother to
> test this patch to compile, because cpmac driver is broken in
> several ways:
>
> 1. This driver won't compile by itself because lack of its header
> describing
> platform data;
> 2. It assumes that fixed PHYs should be created by the ethernet
> driver.
> It is wrong assumption: fixed PHYs creation is platform code
> authority,
> driver must blindly accept bus_id and phy_id platform data variables
> instead.
>
> Also, it seem that that driver doesn't have actual in-tree users, so
> nothing to fix further.
>
> The main purpose of that patch is to get rid of the following Kconfig
> warning:
>
> scripts/kconfig/conf -s arch/powerpc/Kconfig
> drivers/net/Kconfig:1713:warning: 'select' used by config symbol
> 'CPMAC' refers to undefined symbol 'FIXED_MII_100_FDX'
>
> Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
> ---
> drivers/net/Kconfig | 4 +--
> drivers/net/cpmac.c | 55 +++++++++++++++
> +----------------------------------
> 2 files changed, 19 insertions(+), 40 deletions(-)
>
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index 114771a..5380ff9 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -1707,10 +1707,8 @@ config SC92031
>
> config CPMAC
> tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
> - depends on NET_ETHERNET && EXPERIMENTAL && AR7
> + depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN
> select PHYLIB
> - select FIXED_PHY
> - select FIXED_MII_100_FDX
> help
> TI AR7 CPMAC Ethernet support
>
> diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
> index 6fd95a2..88eeb1d 100644
> --- a/drivers/net/cpmac.c
> +++ b/drivers/net/cpmac.c
> @@ -848,15 +848,6 @@ static void cpmac_adjust_link(struct net_device
> *dev)
> spin_unlock(&priv->lock);
> }
>
> -static int cpmac_link_update(struct net_device *dev,
> - struct fixed_phy_status *status)
> -{
> - status->link = 1;
> - status->speed = 100;
> - status->duplex = 1;
> - return 0;
> -}
> -
> static int cpmac_open(struct net_device *dev)
> {
> int i, size, res;
> @@ -999,11 +990,11 @@ static int external_switch;
> static int __devinit cpmac_probe(struct platform_device *pdev)
> {
> int rc, phy_id, i;
> + int mdio_bus_id = cpmac_mii.id;
> struct resource *mem;
> struct cpmac_priv *priv;
> struct net_device *dev;
> struct plat_cpmac_data *pdata;
> - struct fixed_info *fixed_phy;
> DECLARE_MAC_BUF(mac);
>
> pdata = pdev->dev.platform_data;
> @@ -1017,9 +1008,23 @@ static int __devinit cpmac_probe(struct
> platform_device *pdev)
> }
>
> if (phy_id == PHY_MAX_ADDR) {
> - if (external_switch || dumb_switch)
> + if (external_switch || dumb_switch) {
> + struct fixed_phy_status status = {};
> +
> + mdio_bus_id = 0;
> +
> + /*
> + * FIXME: this should be in the platform code!
> + * Since there is not platform code at all (that is,
> + * no mainline users of that driver), place it here
> + * for now.
> + */
> phy_id = 0;
> - else {
> + status.link = 1;
> + status.duplex = 1;
> + status.speed = 100;
> + fixed_phy_add(PHY_POLL, phy_id, &status);
> + } else {
> printk(KERN_ERR "cpmac: no PHY present\n");
> return -ENODEV;
> }
> @@ -1063,32 +1068,8 @@ static int __devinit cpmac_probe(struct
> platform_device *pdev)
> priv->msg_enable = netif_msg_init(debug_level, 0xff);
> memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
>
> - if (phy_id == 31) {
> - snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, cpmac_mii.id,
> - phy_id);
> - } else {
> - /* Let's try to get a free fixed phy... */
> - for (i = 0; i < MAX_PHY_AMNT; i++) {
> - fixed_phy = fixed_mdio_get_phydev(i);
> - if (!fixed_phy)
> - continue;
> - if (!fixed_phy->phydev->attached_dev) {
> - strncpy(priv->phy_name,
> - fixed_phy->phydev->dev.bus_id,
> - BUS_ID_SIZE);
> - fixed_mdio_set_link_update(fixed_phy->phydev,
> - &cpmac_link_update);
> - goto phy_found;
> - }
> - }
> - if (netif_msg_drv(priv))
> - printk(KERN_ERR "%s: Could not find fixed PHY\n",
> - dev->name);
> - rc = -ENODEV;
> - goto fail;
> - }
> + snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id,
> phy_id);
>
> -phy_found:
> priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
> PHY_INTERFACE_MODE_MII);
> if (IS_ERR(priv->phy)) {
> --
> 1.5.2.2
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
