Matt Brown <matthew.brown....@gmail.com> writes:
> The HDAT data area is consumed by skiboot and turned into a device-tree.
> In some cases we would like to look directly at the HDAT, so this patch
> adds a sysfs node to allow it to be viewed. This is not possible through
> /dev/mem as it is reserved memory which is stopped by the /dev/mem filter.
>
> Signed-off-by: Matt Brown <matthew.brown....@gmail.com>
> ---
> Changes between v3 and v4:
> - changed sysfs attribute permissions from 0444 to 0400
> - fixed makefile to be on same line
> - fixed authorship/copyright info
> - re-ordered includes
> - changed hdat_info struct to a static struct
>
> ---
> arch/powerpc/include/asm/opal.h | 1 +
> arch/powerpc/platforms/powernv/Makefile | 2 +-
> arch/powerpc/platforms/powernv/opal-hdat.c | 60
> ++++++++++++++++++++++++++++++
> arch/powerpc/platforms/powernv/opal.c | 2 +
> 4 files changed, 64 insertions(+), 1 deletion(-)
> create mode 100644 arch/powerpc/platforms/powernv/opal-hdat.c
>
> diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
> index 5c7db0f..b26944e 100644
> --- a/arch/powerpc/include/asm/opal.h
> +++ b/arch/powerpc/include/asm/opal.h
> @@ -277,6 +277,7 @@ extern int opal_async_comp_init(void);
> extern int opal_sensor_init(void);
> extern int opal_hmi_handler_init(void);
> extern int opal_event_init(void);
> +extern void opal_hdat_sysfs_init(void);
>
> extern int opal_machine_check(struct pt_regs *regs);
> extern bool opal_mce_check_early_recovery(struct pt_regs *regs);
> diff --git a/arch/powerpc/platforms/powernv/Makefile
> b/arch/powerpc/platforms/powernv/Makefile
> index b5d98cb..3826b70 100644
> --- a/arch/powerpc/platforms/powernv/Makefile
> +++ b/arch/powerpc/platforms/powernv/Makefile
> @@ -2,7 +2,7 @@ obj-y += setup.o opal-wrappers.o opal.o
> opal-async.o idle.o
> obj-y += opal-rtc.o opal-nvram.o opal-lpc.o
> opal-flash.o
> obj-y += rng.o opal-elog.o opal-dump.o
> opal-sysparam.o opal-sensor.o
> obj-y += opal-msglog.o opal-hmi.o opal-power.o
> opal-irqchip.o
> -obj-y += opal-kmsg.o
> +obj-y += opal-kmsg.o opal-hdat.o
>
> obj-$(CONFIG_SMP) += smp.o subcore.o subcore-asm.o
> obj-$(CONFIG_PCI) += pci.o pci-ioda.o npu-dma.o
> diff --git a/arch/powerpc/platforms/powernv/opal-hdat.c
> b/arch/powerpc/platforms/powernv/opal-hdat.c
> new file mode 100644
> index 0000000..19647fd
> --- /dev/null
> +++ b/arch/powerpc/platforms/powernv/opal-hdat.c
> @@ -0,0 +1,60 @@
> +/*
> + * PowerNV OPAL HDAT interface
> + *
> + * Copyright 2017, Matt Brown, IBM Corp.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + */
> +
> +#include <linux/of.h>
> +#include <linux/types.h>
> +#include <asm/io.h>
> +#include <asm/opal.h>
> +
> +static struct {
> + char *base;
> + u64 size;
> +} hdat_info;
> +
> +/* Read function for HDAT attribute in sysfs */
> +static ssize_t hdat_read(struct file *file, struct kobject *kobj,
> + struct bin_attribute *bin_attr, char *to,
> + loff_t pos, size_t count)
> +{
> + if (!hdat_info.base)
> + return -ENODEV;
> +
> + return memory_read_from_buffer(to, count, &pos, hdat_info.base,
> + hdat_info.size);
> +}
> +
> +/* HDAT attribute for sysfs */
> +static struct bin_attribute hdat_attr = {
> + .attr = {.name = "hdat", .mode = 0400},
> + .read = hdat_read
> +};
Why not BIN_ATTR_RO (like opal_export_symmap() does) ?
(I have comments/thoughts on the OPAL side as well)
--
Stewart Smith
OPAL Architect, IBM.
