From: Olaf Hering <[EMAIL PROTECTED]>
The new network driver fec_mpc52xx will not work on efika because the
firmware does not provide all required properties.
http://www.powerdeveloper.org/asset/by-id/46 has a Forth script to
create more properties. But only the phy stuff is required to get a
working network.
This should go into the kernel because its appearently
impossible to boot the script via tftp and then load the real boot
binary (yaboot or zimage).
(Olaf's s-o-b line needs to go here)
Signed-off-by: Grant Likely <[EMAIL PROTECTED]>
---
Here's my respin of Olaf's patch to move it to fixup_device_tree_efika()
and to make it check if the nodes exist before blindly creating them.
Cheers,
g.
arch/powerpc/kernel/prom_init.c | 39 +++++++++++++++++++++++++++++++++++++++
1 files changed, 39 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 1add6ef..5d89a21 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2216,6 +2216,45 @@ static void __init fixup_device_tree_efika(void)
prom_printf("fixup_device_tree_efika: ",
"skipped entry %x - setprop error\n", i);
}
+
+ /* Make sure ethernet mdio bus node exists */
+ node = call_prom("finddevice", 1, 1, ADDR("/builtin/mdio"));
+ if (!PHANDLE_VALID(node)) {
+ prom_printf("Adding Ethernet MDIO node\n");
+ call_prom("interpret", 1, 1,
+ " s\" /builtin\" find-device"
+ " new-device"
+ " 1 encode-int s\" #address-cells\" property"
+ " 0 encode-int s\" #size-cells\" property"
+ " s\" mdio\" 2dup device-name device-type"
+ " s\" mpc5200b-fec-phy\" encode-string"
+ " s\" compatible\" property"
+ " 0xf0003000 0x400 reg"
+ " 0x2 encode-int"
+ " 0x5 encode-int encode+"
+ " 0x3 encode-int encode+"
+ " s\" interrupts\" property"
+ " finish-device");
+ };
+
+ /* Make sure ethernet phy device node exist */
+ node = call_prom("finddevice", 1, 1,
ADDR("/builtin/mdio/ethernet-phy"));
+ if (!PHANDLE_VALID(node)) {
+ prom_printf("Adding Ethernet PHY node\n");
+ call_prom("interpret", 1, 1,
+ " s\" /builtin/mdio\" find-device"
+ " new-device"
+ " s\" ethernet-phy\" device-name"
+ " 0x10 encode-int s\" reg\" property"
+ " my-self"
+ " ihandle>phandle"
+ " finish-device"
+ " s\" /builtin/ethernet\" find-device"
+ " encode-int"
+ " s\" phy-handle\" property"
+ " device-end");
+ }
+
}
#else
#define fixup_device_tree_efika()
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
