This is the patchset of the kprobes jump optimization (a.k.a OPTPROBES)for powerpc. Kprobe being an inevitable tool for kernel developers, enhancing the performance of kprobe has got much importance.
Currently kprobes inserts a trap instruction to probe a running kernel. Jump optimization allows kprobes to replace the trap with a branch, reducing the probe overhead drastically. In this series, conditional branch instructions are not considered for optimization as they have to be assessed carefully in SMP systems. Performance: ============= An optimized kprobe in powerpc is 1.05 to 4.7 times faster than a kprobe. Example: Placed a probe at an offset 0x50 in _do_fork(). *Time Diff here is, difference in time before hitting the probe and after the probed instruction. mftb() is employed in kernel/fork.c for this purpose. # echo 0 > /proc/sys/debug/kprobes-optimization Kprobes globally unoptimized [ 233.607120] Time Diff = 0x1f0 [ 233.608273] Time Diff = 0x1ee [ 233.609228] Time Diff = 0x203 [ 233.610400] Time Diff = 0x1ec [ 233.611335] Time Diff = 0x200 [ 233.612552] Time Diff = 0x1f0 [ 233.613386] Time Diff = 0x1ee [ 233.614547] Time Diff = 0x212 [ 233.615570] Time Diff = 0x206 [ 233.616819] Time Diff = 0x1f3 [ 233.617773] Time Diff = 0x1ec [ 233.618944] Time Diff = 0x1fb [ 233.619879] Time Diff = 0x1f0 [ 233.621066] Time Diff = 0x1f9 [ 233.621999] Time Diff = 0x283 [ 233.623281] Time Diff = 0x24d [ 233.624172] Time Diff = 0x1ea [ 233.625381] Time Diff = 0x1f0 [ 233.626358] Time Diff = 0x200 [ 233.627572] Time Diff = 0x1ed # echo 1 > /proc/sys/debug/kprobes-optimization Kprobes globally optimized [ 70.797075] Time Diff = 0x103 [ 70.799102] Time Diff = 0x181 [ 70.801861] Time Diff = 0x15e [ 70.803466] Time Diff = 0xf0 [ 70.804348] Time Diff = 0xd0 [ 70.805653] Time Diff = 0xad [ 70.806477] Time Diff = 0xe0 [ 70.807725] Time Diff = 0xbe [ 70.808541] Time Diff = 0xc3 [ 70.810191] Time Diff = 0xc7 [ 70.811007] Time Diff = 0xc0 [ 70.812629] Time Diff = 0xc0 [ 70.813640] Time Diff = 0xda [ 70.814915] Time Diff = 0xbb [ 70.815726] Time Diff = 0xc4 [ 70.816955] Time Diff = 0xc0 [ 70.817778] Time Diff = 0xcd [ 70.818999] Time Diff = 0xcd [ 70.820099] Time Diff = 0xcb [ 70.821333] Time Diff = 0xf0 Implementation: =================== The trap instruction is replaced by a branch to a detour buffer. To address the limitation of branch instruction in power architecture detour buffer slot is allocated from a reserved area . This will ensure that the branch is within ?? 32 MB range. Patch 2/3 furnishes this. The current kprobes insn caches allocate memory area for insn slots with module_alloc(). This will always be beyond ?? 32MB range. The detour buffer contains a call to optimized_callback() which in turn call the pre_handler(). Once the pre-handler is run, the original instruction is emulated from the detour buffer itself. Also the detour buffer is equipped with a branch back to the normal work flow after the probed instruction is emulated. Before preparing optimization, Kprobes inserts original(breakpoint instruction)kprobe on the specified address. So, even if the kprobe is not possible to be optimized, it just uses a normal kprobe. Limitations: ============== - Number of probes which can be optimized is limited by the size of the area reserved. - Currently instructions which can be emulated are the only candidates for optimization. - Conditional branch instructions are not optimized. - Probes on kernel module region are not considered for optimization now. RFC patchset for optprobes: https://lkml.org/lkml/2016/5/31/375 https://lkml.org/lkml/2016/5/31/376 https://lkml.org/lkml/2016/5/31/377 https://lkml.org/lkml/2016/5/31/378 Changes from RFC-v3 : - Optimization for kporbe(in case of branch instructions) is limited to unconditional branch instructions only, since the conditional branches are to be assessed carefully in SMP systems. - create_return_branch() is omitted. - Comments by Masami are addressed. Anju T Sudhakar (3): arch/powerpc : Add detour buffer support for optprobes arch/powerpc : optprobes for powerpc core arch/powerpc : Enable optprobes support in powerpc .../features/debug/optprobes/arch-support.txt | 2 +- arch/powerpc/Kconfig | 1 + arch/powerpc/include/asm/kprobes.h | 24 ++ arch/powerpc/include/asm/sstep.h | 1 + arch/powerpc/kernel/Makefile | 1 + arch/powerpc/kernel/optprobes.c | 329 +++++++++++++++++++++ arch/powerpc/kernel/optprobes_head.S | 119 ++++++++ arch/powerpc/lib/sstep.c | 21 ++ 8 files changed, 497 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/kernel/optprobes.c create mode 100644 arch/powerpc/kernel/optprobes_head.S -- 2.7.4
