On Thu, 2016-04-07 at 08:14 +0200, Valentin Longchamp wrote:
> On 06/04/16 23:49, Scott Wood wrote:
> > On Wed, 2016-04-06 at 15:37 +0200, Valentin Longchamp wrote:
> > > Now that the FMAN mac driver has been merged the fman node is relevant.
> > >
> > > The kmcoge4 board implements 3 ethernet interfaces, 1 with a RGMII phy
> > > and 2 with fixed 1 Giga SGMII links.
> > >
> > > Signed-off-by: Valentin Longchamp <valentin.longch...@keymile.com>
> > > ---
> > > arch/powerpc/boot/dts/fsl/kmcoge4.dts | 39
> > > +++++++++++++++++++++++++++++++++++
> > > 1 file changed, 39 insertions(+)
> > >
> > > diff --git a/arch/powerpc/boot/dts/fsl/kmcoge4.dts
> > > b/arch/powerpc/boot/dts/fsl/kmcoge4.dts
> > > index 6858ec9..1cec66d 100644
> > > --- a/arch/powerpc/boot/dts/fsl/kmcoge4.dts
> > > +++ b/arch/powerpc/boot/dts/fsl/kmcoge4.dts
> > > @@ -106,6 +106,45 @@
> > > sata@221000 {
> > > status = "disabled";
> > > };
> > > +
> > > + fman0: fman@400000 {
> > > + enet0: ethernet@e0000 {
> > > + phy-connection-type = "sgmii";
> > > + local-mac-address = [00 11 22 33 44
> > > 55];
> > > + fixed-link {
> > > + speed = <1000>;
> > > + full-duplex;
> > > + };
> > > + };
> > > + mdio0: mdio@e1120 {
> > > + front_phy: ethernet-phy@11 {
> > > + reg = <0x11>;
> > > + };
> > > + };
> > > +
> > > + enet1: ethernet@e2000 {
> > > + phy-connection-type = "sgmii";
> > > + local-mac-address = [00 11 22 33 44
> > > 56];
> > > + fixed-link {
> > > + speed = <1000>;
> > > + full-duplex;
> > > + };
> > > + };
> >
> > No hardcoded MAC addresses.
> >
>
> For these 2 interfaces where I have the local-mac-address field, the MAC
> addresses are set later by an application that reads the real address in
> some
> EEPROM. However, in order to let the fman mac_probe to run successfully in
> the
> first place I have set non-zero MAC addresses since the local-mac-address
> fields
> are not set by u-boot.
Why can't it be set from U-Boot?
If you absolutely must hardcode a mac address, use one with the locally
-administered bit set (0x02 in the first byte).
> I have found several local-mac-address fields in other DTS files that are
> all
> zeros, and thus are rejected by of_get_mac_address. Are they leftovers from
> the
> past or should they be used here as well ? If not, I will simply drop these
> 2
> fields.
That's a relic from ancient U-Boots that could only overwrite existing
properties rather than insert them from scratch.
-Scott
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
