Paulus, Can you take the crash shutdown hook patches as well?
http://patchwork.ozlabs.org/linuxppc/patch?person=414&id=15546 http://patchwork.ozlabs.org/linuxppc/patch?person=414&id=15547 Mikey In message <[EMAIL PROTECTED]> you wrote: > Andre Detsch (1): > [POWERPC] cell: safer of_has_vicinity routine > > Balbir Singh (1): > [POWERPC] Fake NUMA emulation for PowerPC > > Benjamin Herrenschmidt (20): > [POWERPC] pci32: Remove bogus alignment message > [POWERPC] pci32: Use generic pci_assign_unassign_resources > [POWERPC] pci32: Remove PowerMac P2P bridge IO hack > [POWERPC] pci32: Add flags modifying the PCI code behaviour > [POWERPC] pci32: Remove obsolete PowerMac bus number hack > [POWERPC] pci32: Add platform option to enable /proc PCI domains > [POWERPC] Merge pcibios_resource_to_bus/bus_to_resource > [POWERPC] Merge PCI resource fixups > [POWERPC] Merge PCI resource allocation & assignment > [POWERPC] fix iSeries PCI resource management > [POWERPC] Updates/fixes to 32 bits pcibios_enable_device() > [POWERPC] Merge 32 and 64 bits pcibios_enable_device > [POWERPC] Fixup powermac enable device hook > [POWERPC] Clear pci_probe_only on 64 bits PowerMac > [POWERPC] Various fixes to pcibios_enable_device() > [POWERPC] Enable self-view of the HT host bridge on PowerMac G5 > [POWERPC] Improve resource setup of PowerMac G5 HT bridge > [POWERPC] Fixup skipping of PowerMac PCI<->PCI bridge "closed" resource s > [POWERPC] Disable PCI IO/Mem on a device when resources can't be alloca ted > [POWERPC] Fix PCI IRQ fallback code to not map IRQ 0 > > Bob Nelson (1): > [POWERPC] OProfile: fix cbe pm signal routing problem > > Cyrill Gorcunov (1): > [POWERPC] CHRP: Fix possible NULL pointer dereference > > David Gibson (2): > [POWERPC] Merge dtc upstream source > [POWERPC] Use embedded dtc in kernel builds > > Grant Likely (1): > [POWERPC] Add machine initcall macros > > Ishizaki Kou (3): > [POWERPC] cell: add missing '\n' > [POWERPC] Cleanup calling mmio_nvram_init > [POWERPC] celleb: Split machine definition > > Jeremy Kerr (6): > [POWERPC] cell: export force_sig_info() > [POWERPC] cell: handle kernel SLB setup in spu_base.c > [POWERPC] cell: use spu_load_slb for SLB setup > [POWERPC] cell: add spu_64k_pages_available() check > [POWERPC] cell: handle SPE kernel mappings that cross segment boundarie s > [POWERPC] cell: catch errors from sysfs_create_group() > > Jochen Friedrich (2): > [POWERPC] Add support for PORTA and PORTB odr registers > [POWERPC] Move CPM command handling into the cpm drivers > > Johannes Berg (3): > [POWERPC] adb: Replace sleep notifier with platform driver suspend/resu me hooks > [POWERPC] via-pmu: Kill sleep notifiers completely > [POWERPC] powermac: Use generic suspend code > > Jon Loeliger (3): > [POWERPC] 8xxx: Convert #include of asm/of_{platform, device}.h into li nux/of_{platform, device}.h. > [POWERPC] 86xx: Add aliases node to 8641hpcn DTS file. > [POWERPC] cell: Convert #include of asm/of_{platform, device}.h into li nux/of_{platform, device}.h. > > Julia Lawall (3): > [POWERPC] arch/ppc: Remove an unnecessary pci_dev_put > [POWERPC] arch/powerpc: Add missing of_node_put > [POWERPC] cell/cbe_regs.c: Add missing of_node_put > > Kevin Corry (1): > [POWERPC] perfmon2: make pm_interval register read/write > > Kumar Gala (5): > [POWERPC] Add SPRN for Embedded registers specified in PowerISA 2.04 > [POWERPC] Emulate isel (Integer Select) instruction > [POWERPC] FSL: I2C device tree cleanups > [POWERPC] FSL: enet device tree cleanups > [POWERPC] FSL: Added aliases node to device trees > > Li Yang (5): > [POWERPC] add e300c4 entry to cputable > [POWERPC] ipic: add new interrupts introduced by new chip > [POWERPC] 83xx: Add platform support for MPC837x MDS board > [POWERPC] 83xx: Add MPC837x MDS default kernel configuration > [POWERPC] ipic: ack only for edge interrupts > > Li Zefan (1): > [POWERPC] Don't cast a struct pointer to list_head pointer > > Lucas Woods (2): > [POWERPC] arch/powerpc: Remove duplicate includes > [POWERPC] arch/ppc: Remove duplicate includes > > Michael Ellerman (1): > [POWERPC] Implement pci_set_dma_mask() in terms of the dma_ops > > Milton Miller (6): > [POWERPC] Push down or eliminate smp_processor_id calls in xics code > [POWERPC] init_decrementer_clockevent can be static __init > [POWERPC] Use __get_cpu_var in time.c > [POWERPC] Timer interrupt: use a struct for two per_cpu varables > [POWERPC] Depend on ->initialized in calc_steal_time > [POWERPC] Optimize account_system_vtime > > Olof Johansson (3): > [POWERPC] MPIC: Minor optimization of ipi handler > [POWERPC] pasemi: Implement MSI support > [POWERPC] holly.c: Remove unnecessary include of linux/ide.h > > Paul Mackerras (5): > [POWERPC] Convert media-bay.c to use the kthread API > [POWERPC] Convert adb.c to use kthread API and not spin on ADB requests > [POWERPC] Convert therm_pm72.c to use the kthread API > [POWERPC] Convert therm_windtunnel.c to use the kthread API > [POWERPC] Fix sleep on powerbook 3400 > > Scott Wood (5): > [POWERPC] 8xx: Convert mpc866ads to the new device binding. > [POWERPC] 83xx: mpc834x_mds: Fix whitespace and call of_platform_bus_pr obe(). > [POWERPC] 83xx: mpc8313erdb: Fix whitespace. > [POWERPC] wrapper: Rename offset in offset_devp() > [POWERPC] wrapper: Treat NULL as root node in devp_offset; add devp_off set_find() > > Stephen Rothwell (2): > [POWERPC] iSeries: Fix unregistering HV event handlers > [POWERPC] Stop the TOC overflowing for large builds > > Timur Tabi (4): > [POWERPC] 86xx: fix guts_set_dmacr() and add guts_set_pmuxcr_dma() to i mmap_86xx.h > [POWERPC] QE: change qe_setbrg() to take an enum qe_clock instead of an integer > [POWERPC] qe: add function qe_clock_source() > [POWERPC] ucc_geth: use rx-clock-name and tx-clock-name device tree pro perties > > [EMAIL PROTECTED] (4): > [POWERPC] arch/powerpc/: Spelling fixes > [POWERPC] include/asm-powerpc/: Spelling fixes > [POWERPC] arch/ppc/: Spelling fixes > [POWERPC] include/asm-ppc/: Spelling fixes > > _______________________________________________ > Linuxppc-dev mailing list > Linuxppc-dev@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-dev > _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
