device_type property is bogus, better use proper compatible property.

Also change compatible to "fsl,ucc-mdio".

Per http://ozlabs.org/pipermail/linuxppc-dev/2007-December/048388.html

Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
---
 arch/powerpc/boot/dts/mpc832x_mds.dts |    3 +--
 arch/powerpc/boot/dts/mpc832x_rdb.dts |    3 +--
 arch/powerpc/boot/dts/mpc836x_mds.dts |    3 +--
 arch/powerpc/boot/dts/mpc8568mds.dts  |    2 +-
 drivers/net/ucc_geth_mii.c            |    3 +--
 5 files changed, 5 insertions(+), 9 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts 
b/arch/powerpc/boot/dts/mpc832x_mds.dts
index ef8cd1e..97757ed 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -254,8 +254,7 @@
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <2320 18>;
-                       device_type = "mdio";
-                       compatible = "ucc_geth_phy";
+                       compatible = "fsl,ucc-mdio";
 
                        phy3: [EMAIL PROTECTED] {
                                interrupt-parent = < &ipic >;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts 
b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 7c4f028..b1c73f1 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -235,8 +235,7 @@
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <3120 18>;
-                       device_type = "mdio";
-                       compatible = "ucc_geth_phy";
+                       compatible = "fsl,ucc-mdio";
 
                        phy00:[EMAIL PROTECTED] {
                                interrupt-parent = <&pic>;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts 
b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 5c73786..330212d 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -287,8 +287,7 @@
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <2120 18>;
-                       device_type = "mdio";
-                       compatible = "ucc_geth_phy";
+                       compatible = "fsl,ucc-mdio";
 
                        phy0: [EMAIL PROTECTED] {
                                interrupt-parent = < &ipic >;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts 
b/arch/powerpc/boot/dts/mpc8568mds.dts
index 7ad4b9f..c00aec9 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -355,7 +355,7 @@
                        #address-cells = <1>;
                        #size-cells = <0>;
                        reg = <2120 18>;
-                       compatible = "ucc_geth_phy";
+                       compatible = "fsl,ucc-mdio";
 
                        /* These are the same PHYs as on
                         * gianfar's MDIO bus */
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index df884f0..de8ba1f 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -253,8 +253,7 @@ int uec_mdio_remove(struct of_device *ofdev)
 
 static struct of_device_id uec_mdio_match[] = {
        {
-               .type = "mdio",
-               .compatible = "ucc_geth_phy",
+               .compatible = "fsl,ucc-mdio",
        },
        {},
 };
-- 
1.5.2.2

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Reply via email to