Currently the assembly to save and restore Altivec registers boils down to a load immediate of the offset of the specific Altivec register in memory followed by the load/store which repeats in sequence for each Altivec register.
This patch attempts to do better by loading up four registers with immediates so that the loads and stores can be batched up and better pipelined by the processor. This patch results in four load/stores in sequence and one add between groups of four. Also, by using a pair of base registers it means that the result of the add is not needed by the following instruction. Signed-off-by: Cyril Bur <cyril...@gmail.com> --- These patches need to be applied on to of my rework of FPU/VMX/VSX switching: https://patchwork.ozlabs.org/patch/589703/ I left in some of my comments indicating if functions are called from C or not. Looking at them now, they might be a bit much, let me know what you think. Tested 64 bit BE and LE under KVM, not sure how I can test 32bit. arch/powerpc/include/asm/ppc_asm.h | 63 ++++++++++++++++++++++++++++++-------- arch/powerpc/kernel/tm.S | 6 ++-- arch/powerpc/kernel/vector.S | 20 +++++++++--- 3 files changed, 70 insertions(+), 19 deletions(-) diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index 499d9f8..5ba69ed 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -110,18 +110,57 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR) #define REST_16FPRS(n, base) REST_8FPRS(n, base); REST_8FPRS(n+8, base) #define REST_32FPRS(n, base) REST_16FPRS(n, base); REST_16FPRS(n+16, base) -#define SAVE_VR(n,b,base) li b,16*(n); stvx n,base,b -#define SAVE_2VRS(n,b,base) SAVE_VR(n,b,base); SAVE_VR(n+1,b,base) -#define SAVE_4VRS(n,b,base) SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base) -#define SAVE_8VRS(n,b,base) SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base) -#define SAVE_16VRS(n,b,base) SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base) -#define SAVE_32VRS(n,b,base) SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base) -#define REST_VR(n,b,base) li b,16*(n); lvx n,base,b -#define REST_2VRS(n,b,base) REST_VR(n,b,base); REST_VR(n+1,b,base) -#define REST_4VRS(n,b,base) REST_2VRS(n,b,base); REST_2VRS(n+2,b,base) -#define REST_8VRS(n,b,base) REST_4VRS(n,b,base); REST_4VRS(n+4,b,base) -#define REST_16VRS(n,b,base) REST_8VRS(n,b,base); REST_8VRS(n+8,b,base) -#define REST_32VRS(n,b,base) REST_16VRS(n,b,base); REST_16VRS(n+16,b,base) +#define __SAVE_4VRS(n,off0,off1,off2,off3,base) \ + stvx n,base,off0; \ + stvx n+1,base,off1; \ + stvx n+2,base,off2; \ + stvx n+3,base,off3 + +/* Restores the base for the caller */ +#define SAVE_32VRS(reg0,reg1,reg2,reg3,reg4,base) \ + addi reg4,base,64; \ + li reg0,0; li reg1,16; li reg2,32; li reg3,48; \ + __SAVE_4VRS(0,reg0,reg1,reg2,reg3,base); \ + addi base,base,128; \ + __SAVE_4VRS(4,reg0,reg1,reg2,reg3,reg4); \ + addi reg4,reg4,128; \ + __SAVE_4VRS(8,reg0,reg1,reg2,reg3,base); \ + addi base,base,128; \ + __SAVE_4VRS(12,reg0,reg1,reg2,reg3,reg4); \ + addi reg4,reg4,128; \ + __SAVE_4VRS(16,reg0,reg1,reg2,reg3,base); \ + addi base,base,128; \ + __SAVE_4VRS(20,reg0,reg1,reg2,reg3,reg4); \ + addi reg4,reg4,128; \ + __SAVE_4VRS(24,reg0,reg1,reg2,reg3,base); \ + __SAVE_4VRS(28,reg0,reg1,reg2,reg3,reg4); \ + subi base,base,384 + +#define __REST_4VRS(n,off0,off1,off2,off3,base) \ + lvx n,base,off0; \ + lvx n+1,base,off1; \ + lvx n+2,base,off2; \ + lvx n+3,base,off3 + +/* Restores the base for the caller */ +#define REST_32VRS(reg0,reg1,reg2,reg3,reg4,base) \ + addi reg4,base,64; \ + li reg0,0; li reg1,16; li reg2,32; li reg3,48; \ + __REST_4VRS(0,reg0,reg1,reg2,reg3,base); \ + addi base,base,128; \ + __REST_4VRS(4,reg0,reg1,reg2,reg3,reg4); \ + addi reg4,reg4,128; \ + __REST_4VRS(8,reg0,reg1,reg2,reg3,base); \ + addi base,base,128; \ + __REST_4VRS(12,reg0,reg1,reg2,reg3,reg4); \ + addi reg4,reg4,128; \ + __REST_4VRS(16,reg0,reg1,reg2,reg3,base); \ + addi base,base,128; \ + __REST_4VRS(20,reg0,reg1,reg2,reg3,reg4); \ + addi reg4,reg4,128; \ + __REST_4VRS(24,reg0,reg1,reg2,reg3,base); \ + __REST_4VRS(28,reg0,reg1,reg2,reg3,reg4); \ + subi base,base,384 #ifdef __BIG_ENDIAN__ #define STXVD2X_ROT(n,b,base) STXVD2X(n,b,base) diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S index bf8f34a..81e1305 100644 --- a/arch/powerpc/kernel/tm.S +++ b/arch/powerpc/kernel/tm.S @@ -96,6 +96,8 @@ _GLOBAL(tm_abort) * they will abort back to the checkpointed state we save out here. * * Call with IRQs off, stacks get all out of sync for some periods in here! + * + * Is called from C */ _GLOBAL(tm_reclaim) mfcr r6 @@ -151,7 +153,7 @@ _GLOBAL(tm_reclaim) beq dont_backup_vec addi r7, r3, THREAD_TRANSACT_VRSTATE - SAVE_32VRS(0, r6, r7) /* r6 scratch, r7 transact vr state */ + SAVE_32VRS(r6,r8,r9,r10,r11,r7) /* r6,r8,r9,r10,r11 scratch, r7 transact vr state */ mfvscr v0 li r6, VRSTATE_VSCR stvx v0, r7, r6 @@ -361,7 +363,7 @@ _GLOBAL(__tm_recheckpoint) li r5, VRSTATE_VSCR lvx v0, r8, r5 mtvscr v0 - REST_32VRS(0, r5, r8) /* r5 scratch, r8 ptr */ + REST_32VRS(r5,r6,r9,r10,r11,r8) /* r5,r6,r9,r10,r11 scratch, r8 ptr */ dont_restore_vec: ld r5, THREAD_VRSAVE(r3) mtspr SPRN_VRSAVE, r5 diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S index 1c2e7a3..8d587fb 100644 --- a/arch/powerpc/kernel/vector.S +++ b/arch/powerpc/kernel/vector.S @@ -13,6 +13,8 @@ * This is similar to load_up_altivec but for the transactional version of the * vector regs. It doesn't mess with the task MSR or valid flags. * Furthermore, VEC laziness is not supported with TM currently. + * + * Is called from C */ _GLOBAL(do_load_up_transact_altivec) mfmsr r6 @@ -27,7 +29,7 @@ _GLOBAL(do_load_up_transact_altivec) lvx v0,r10,r3 mtvscr v0 addi r10,r3,THREAD_TRANSACT_VRSTATE - REST_32VRS(0,r4,r10) + REST_32VRS(r4,r5,r6,r7,r8,r10) blr #endif @@ -35,20 +37,24 @@ _GLOBAL(do_load_up_transact_altivec) /* * Load state from memory into VMX registers including VSCR. * Assumes the caller has enabled VMX in the MSR. + * + * Is called from C */ _GLOBAL(load_vr_state) li r4,VRSTATE_VSCR lvx v0,r4,r3 mtvscr v0 - REST_32VRS(0,r4,r3) + REST_32VRS(r4,r5,r6,r7,r8,r3) blr /* * Store VMX state into memory, including VSCR. * Assumes the caller has enabled VMX in the MSR. + * + * NOT called from C */ _GLOBAL(store_vr_state) - SAVE_32VRS(0, r4, r3) + SAVE_32VRS(r4,r5,r6,r7,r8,r3) mfvscr v0 li r4, VRSTATE_VSCR stvx v0, r4, r3 @@ -63,6 +69,8 @@ _GLOBAL(store_vr_state) * * Note that on 32-bit this can only use registers that will be * restored by fast_exception_return, i.e. r3 - r6, r10 and r11. + * + * NOT called from C */ _GLOBAL(load_up_altivec) mfmsr r5 /* grab the current MSR */ @@ -101,13 +109,15 @@ _GLOBAL(load_up_altivec) stw r4,THREAD_USED_VR(r5) lvx v0,r10,r6 mtvscr v0 - REST_32VRS(0,r4,r6) + REST_32VRS(r3,r4,r5,r10,r11,r6) /* restore registers and return */ blr /* * save_altivec(tsk) * Save the vector registers to its thread_struct + * + * Is called from C */ _GLOBAL(save_altivec) addi r3,r3,THREAD /* want THREAD of task */ @@ -116,7 +126,7 @@ _GLOBAL(save_altivec) PPC_LCMPI 0,r7,0 bne 2f addi r7,r3,THREAD_VRSTATE -2: SAVE_32VRS(0,r4,r7) +2: SAVE_32VRS(r4,r5,r6,r8,r9,r7) mfvscr v0 li r4,VRSTATE_VSCR stvx v0,r4,r7 -- 2.7.2 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
