On Tue, Dec 11, 2007 at 12:42:18PM -0600, Kumar Gala wrote:
[...]
> let's go ahead w/an aliases node:
>
> aliases {
> ethernet0 = &enet0;
> ethernet1 = &enet1;
> ...
> serial0 = &serial0;
> serial1 = &serial1;
> };
>
> >
> >+ cpus {
> >+ #address-cells = <1>;
> >+ #size-cells = <0>;
[...]
> >+
>
> Add serial labels:
> serial0: [EMAIL PROTECTED] {...
> >
> >+ [EMAIL PROTECTED] {
[...]
> ethernet labels
> >
> >+ [EMAIL PROTECTED] {
Done, thanks. As time goes by, I also added support for UCC7,4
(10/100 ethernet).
Plus, added compatible = "fsl,qe-pario"; into the par_io node,
now I'm searching for it instead of "par_io" name.
This is still RFC, so nitpicking is highly appreciated.
- - - -
From: Anton Vorontsov <[EMAIL PROTECTED]>
[POWERPC] MPC8360E-RDK: Device tree and board file
This is new board made by Freescale Semiconductor Inc. and
Logic Product Development.
Currently supported:
1. UEC1,2,7,4
2. I2C
3. SPI
4. NS16550 serial
Not supported so far:
1. StMICRO NAND512W3A2BN6E, 512 Mbit (supported with FSL UPM patches)
2. QE SCCs (slow UCCs, used as an UARTs)
3. PCI
4. ADC AD7843
5. FHCI USB
6. Graphics controller, Fujitsu MB86277
Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
---
arch/powerpc/boot/dts/mpc836x_rdk.dts | 288 +++++++++++++++++++++++++++++
arch/powerpc/platforms/83xx/Kconfig | 11 +-
arch/powerpc/platforms/83xx/Makefile | 1 +
arch/powerpc/platforms/83xx/mpc836x_rdk.c | 112 +++++++++++
4 files changed, 411 insertions(+), 1 deletions(-)
create mode 100644 arch/powerpc/boot/dts/mpc836x_rdk.dts
create mode 100644 arch/powerpc/platforms/83xx/mpc836x_rdk.c
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts
b/arch/powerpc/boot/dts/mpc836x_rdk.dts
new file mode 100644
index 0000000..c873c39
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -0,0 +1,288 @@
+/*
+ * MPC8360E RDK Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2007 MontaVista Software, Inc.
+ * Anton Vorontsov <[EMAIL PROTECTED]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "MPC8360ERDK", "MPC836xRDK", "MPC83xxRDK";
+ model = "MPC8360RDK";
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,[EMAIL PROTECTED] {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-size = <32768>;
+ /* filled by u-boot */
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ };
+ };
+
+ [EMAIL PROTECTED] {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ ranges = <0 0xe0000000 0x00100000>;
+ reg = <0xe0000000 0x00000200>;
+ /* filled by u-boot */
+ bus-frequency = <0>;
+
+ [EMAIL PROTECTED] {
+ device_type = "watchdog";
+ compatible = "mpc83xx_wdt";
+ reg = <0x200 0x100>;
+ };
+
+ [EMAIL PROTECTED] {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+ };
+
+ [EMAIL PROTECTED] {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <16 8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+ };
+
+ serial0: [EMAIL PROTECTED] {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ interrupts = <9 8>;
+ interrupt-parent = <&ipic>;
+ /* filled by u-boot */
+ clock-frequency = <0>;
+ };
+
+ serial1: [EMAIL PROTECTED] {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ interrupts = <10 8>;
+ interrupt-parent = <&ipic>;
+ /* filled by u-boot */
+ clock-frequency = <0>;
+ };
+
+ [EMAIL PROTECTED] {
+ device_type = "crypto";
+ model = "SEC2";
+ compatible = "talitos";
+ reg = <0x30000 0x10000>;
+ interrupts = <11 8>;
+ interrupt-parent = <&ipic>;
+ num-channels = <4>;
+ channel-fifo-len = <24>;
+ exec-units-mask = <0x0000007e>;
+ /*
+ * desc mask is for rev1.x, we need runtime fixup
+ * for >=2.x
+ */
+ descriptor-types-mask = <0x01010ebf>;
+ };
+
+ ipic: [EMAIL PROTECTED] {
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0x700 0x100>;
+ device_type = "ipic";
+ };
+
+ [EMAIL PROTECTED] {
+ compatible = "fsl,qe-pario";
+ reg = <0x1400 0x100>;
+ num-ports = <7>;
+ };
+ };
+
+ [EMAIL PROTECTED] {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ model = "QE";
+ ranges = <0 0xe0100000 0x00100000>;
+ reg = <0xe0100000 0x480>;
+ /* filled by u-boot */
+ brg-frequency = <0>;
+ bus-frequency = <0>;
+
+ [EMAIL PROTECTED] {
+ device_type = "muram";
+ ranges = <0 0x00010000 0x0000c000>;
+
+ [EMAIL PROTECTED] {
+ reg = <0 0xc000>;
+ };
+ };
+
+ [EMAIL PROTECTED] {
+ device_type = "spi";
+ compatible = "fsl_spi";
+ reg = <0x4c0 0x40>;
+ interrupts = <2>;
+ interrupt-parent = <&qeic>;
+ mode = "cpu";
+ };
+
+ [EMAIL PROTECTED] {
+ device_type = "spi";
+ compatible = "fsl_spi";
+ reg = <0x500 0x40>;
+ interrupts = <1>;
+ interrupt-parent = <&qeic>;
+ mode = "cpu";
+ };
+
+ [EMAIL PROTECTED] {
+ device_type = "usb";
+ compatible = "qe_udc";
+ reg = <0x6c0 0x40 0x8b00 0x100>;
+ interrupts = <11>;
+ interrupt-parent = <&qeic>;
+ mode = "slave";
+ };
+
+ enet0: [EMAIL PROTECTED] {
+ device_type = "network";
+ compatible = "ucc_geth";
+ model = "UCC";
+ device-id = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ rx-clock = <0>;
+ tx-clock = <25>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+ /* filled by u-boot */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ enet1: [EMAIL PROTECTED] {
+ device_type = "network";
+ compatible = "ucc_geth";
+ model = "UCC";
+ device-id = <2>;
+ reg = <0x3000 0x200>;
+ interrupts = <33>;
+ interrupt-parent = <&qeic>;
+ rx-clock = <0>;
+ tx-clock = <20>;
+ phy-handle = <&phy4>;
+ phy-connection-type = "rgmii-id";
+ /* filled by u-boot */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ enet2: [EMAIL PROTECTED] {
+ device_type = "network";
+ compatible = "ucc_geth";
+ model = "UCC";
+ device-id = <7>;
+ reg = <0x2600 0x200>;
+ interrupts = <34>;
+ interrupt-parent = <&qeic>;
+ rx-clock = <36>;
+ tx-clock = <35>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "mii";
+ /* filled by u-boot */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ enet3: [EMAIL PROTECTED] {
+ device_type = "network";
+ compatible = "ucc_geth";
+ model = "UCC";
+ device-id = <4>;
+ reg = <0x3200 0x200>;
+ interrupts = <35>;
+ interrupt-parent = <&qeic>;
+ rx-clock = <24>;
+ tx-clock = <23>;
+ phy-handle = <&phy3>;
+ phy-connection-type = "mii";
+ /* filled by u-boot */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ [EMAIL PROTECTED] {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2120 0x18>;
+ device_type = "mdio";
+ compatible = "ucc_geth_phy";
+
+ phy1: [EMAIL PROTECTED] {
+ reg = <1>;
+ device_type = "ethernet-phy";
+ };
+
+ phy2: [EMAIL PROTECTED] {
+ reg = <2>;
+ device_type = "ethernet-phy";
+ };
+
+ phy3: [EMAIL PROTECTED] {
+ reg = <3>;
+ device_type = "ethernet-phy";
+ };
+
+ phy4: [EMAIL PROTECTED] {
+ reg = <4>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ qeic: [EMAIL PROTECTED] {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ device_type = "qeic";
+ reg = <0x80 0x80>;
+ big-endian;
+ interrupts = <32 8 33 8>;
+ interrupt-parent = <&ipic>;
+ };
+ };
+};
diff --git a/arch/powerpc/platforms/83xx/Kconfig
b/arch/powerpc/platforms/83xx/Kconfig
index 2430ac8..0d5a87c 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -55,6 +55,15 @@ config MPC837x_MDS
select DEFAULT_UIMAGE
help
This option enables support for the MPC837x MDS Processor Board.
+
+config MPC836x_RDK
+ bool "Freescale/Logic MPC836x RDK"
+ select DEFAULT_UIMAGE
+ select QUICC_ENGINE
+ help
+ This option enables support for the MPC836x RDK Processor Board,
+ also known as ZOOM PowerQUICC Kit.
+
endchoice
config PPC_MPC831x
@@ -79,7 +88,7 @@ config PPC_MPC836x
bool
select PPC_UDBG_16550
select PPC_INDIRECT_PCI
- default y if MPC836x_MDS
+ default y if MPC836x_MDS || MPC836x_RDK
config PPC_MPC837x
bool
diff --git a/arch/powerpc/platforms/83xx/Makefile
b/arch/powerpc/platforms/83xx/Makefile
index df46629..bf1b799 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o
obj-$(CONFIG_MPC836x_MDS) += mpc836x_mds.o
obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o
obj-$(CONFIG_MPC837x_MDS) += mpc837x_mds.o
+obj-$(CONFIG_MPC836x_RDK) += mpc836x_rdk.o
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c
b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
new file mode 100644
index 0000000..2d94b38
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -0,0 +1,112 @@
+/*
+ * MPC8360E-RDK board file.
+ *
+ * Copyright (c) 2006 Freescale Semicondutor, Inc.
+ * Copyright (c) 2007 MontaVista Software, Inc.
+ * Anton Vorontsov <[EMAIL PROTECTED]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+#include <asm/io.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc83xx.h"
+
+static struct of_device_id mpc836x_rdk_ids[] = {
+ { .type = "soc", },
+ { .compatible = "soc", },
+ { .type = "qe", },
+ {},
+};
+
+static int __init mpc836x_rdk_declare_of_platform_devices(void)
+{
+ if (!machine_is(mpc836x_rdk))
+ return 0;
+
+ of_platform_bus_probe(NULL, mpc836x_rdk_ids, NULL);
+
+ return 0;
+}
+device_initcall(mpc836x_rdk_declare_of_platform_devices);
+
+static void __init mpc836x_rdk_setup_arch(void)
+{
+ struct device_node *np;
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc836x_rdk_setup_arch()", 0);
+
+#ifdef CONFIG_QUICC_ENGINE
+ qe_reset();
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe-pario");
+ if (np) {
+ par_io_init(np);
+ of_node_put(np);
+ } else {
+ pr_warning("QE PIO not initialized!\n");
+ }
+#endif
+}
+
+static void __init mpc836x_rdk_init_IRQ(void)
+{
+ struct device_node *np;
+
+ np = of_find_node_by_type(NULL, "ipic");
+ if (!np)
+ return;
+
+ ipic_init(np, 0);
+
+ /*
+ * Initialize the default interrupt mapping priorities,
+ * in case the boot rom changed something on us.
+ */
+ ipic_set_default_priority();
+ of_node_put(np);
+
+#ifdef CONFIG_QUICC_ENGINE
+ np = of_find_node_by_type(NULL, "qeic");
+ if (!np)
+ return;
+
+ qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
+ of_node_put(np);
+#endif
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened.
+ */
+static int __init mpc836x_rdk_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "MPC836xRDK");
+}
+
+define_machine(mpc836x_rdk) {
+ .name = "MPC836x RDK",
+ .probe = mpc836x_rdk_probe,
+ .setup_arch = mpc836x_rdk_setup_arch,
+ .init_IRQ = mpc836x_rdk_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
--
1.5.2.2
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
