On 12/5/07, Jon Loeliger <[EMAIL PROTECTED]> wrote:
>
> The addition of the aliases node is needed for U-Boot
> and, eventually, cuImage, to help locate the proper
> nodes reliably when using the libfdt approach.
>
> Signed-off-by: Jon Loeliger <[EMAIL PROTECTED]>
> ---
> arch/powerpc/boot/dts/mpc8641_hpcn.dts | 28 ++++++++++++++++++++--------
> 1 files changed, 20 insertions(+), 8 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
> b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
> index abb26dc..b039f21 100644
> --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
> +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
> @@ -16,6 +16,17 @@
> #address-cells = <1>;
> #size-cells = <1>;
>
> + aliases {
> + ethernet0 = &enet0;
> + ethernet1 = &enet1;
> + ethernet2 = &enet2;
> + ethernet3 = &enet3;
> + serial0 = &serial0;
> + serial1 = &serial1;
> + pci0 = &pci0;
> + pci1 = &pci1;
> + };
I had thought aliases were supposed to be full paths to nodes instead
of phandles. Was I wrong?
> +
> cpus {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -107,7 +118,7 @@
> };
> };
>
> - [EMAIL PROTECTED] {
> + enet0: [EMAIL PROTECTED] {
> #address-cells = <1>;
> #size-cells = <0>;
> device_type = "network";
> @@ -127,7 +138,7 @@
> phy-connection-type = "rgmii-id";
> };
>
> - [EMAIL PROTECTED] {
> + enet1: [EMAIL PROTECTED] {
> #address-cells = <1>;
> #size-cells = <0>;
> device_type = "network";
> @@ -147,7 +158,7 @@
> phy-connection-type = "rgmii-id";
> };
>
> - [EMAIL PROTECTED] {
> + enet2: [EMAIL PROTECTED] {
> #address-cells = <1>;
> #size-cells = <0>;
> device_type = "network";
> @@ -167,7 +178,7 @@
> phy-connection-type = "rgmii-id";
> };
>
> - [EMAIL PROTECTED] {
> + enet3: [EMAIL PROTECTED] {
> #address-cells = <1>;
> #size-cells = <0>;
> device_type = "network";
> @@ -186,7 +197,8 @@
> phy-handle = <&phy3>;
> phy-connection-type = "rgmii-id";
> };
> - [EMAIL PROTECTED] {
> +
> + serial0: [EMAIL PROTECTED] {
> device_type = "serial";
> compatible = "ns16550";
> reg = <4500 100>;
> @@ -195,7 +207,7 @@
> interrupt-parent = <&mpic>;
> };
>
> - [EMAIL PROTECTED] {
> + serial1: [EMAIL PROTECTED] {
> device_type = "serial";
> compatible = "ns16550";
> reg = <4600 100>;
> @@ -222,7 +234,7 @@
> };
> };
>
> - [EMAIL PROTECTED] {
> + pci0: [EMAIL PROTECTED] {
> compatible = "fsl,mpc8641-pcie";
> device_type = "pci";
> #interrupt-cells = <1>;
> @@ -430,7 +442,7 @@
>
> };
>
> - [EMAIL PROTECTED] {
> + pci1: [EMAIL PROTECTED] {
> compatible = "fsl,mpc8641-pcie";
> device_type = "pci";
> #interrupt-cells = <1>;
> --
> 1.5.2.1.126.g6abd0
>
>
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
[EMAIL PROTECTED]
(403) 399-0195
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
