> -----Original Message----- > From: Kumar Gala [mailto:[EMAIL PROTECTED] > Sent: Friday, November 30, 2007 8:44 AM > To: Li Yang > Cc: linuxppc-dev@ozlabs.org > Subject: Re: [PATCH v7 9/9] add MPC837x MDS board default device tree > > > On Oct 19, 2007, at 6:38 AM, Li Yang wrote: > > > Signed-off-by: Li Yang <[EMAIL PROTECTED]> > > --- > > Updated pci node. > > arch/powerpc/boot/dts/mpc8377_mds.dts | 282 > ++++++++++++++++++++++++ > > +++++++ > > arch/powerpc/boot/dts/mpc8378_mds.dts | 264 > ++++++++++++++++++++++++ > > +++++ > > arch/powerpc/boot/dts/mpc8379_mds.dts | 300 > ++++++++++++++++++++++++ > > +++++++++ > > 3 files changed, 846 insertions(+), 0 deletions(-) create > mode 100644 > > arch/powerpc/boot/dts/mpc8377_mds.dts > > create mode 100644 arch/powerpc/boot/dts/mpc8378_mds.dts > > create mode 100644 arch/powerpc/boot/dts/mpc8379_mds.dts > > Can you make the following updates: > > * Drop serdes and phy-handles > * Update sata nodes: > > + [EMAIL PROTECTED] { > + compatible = "fsl,mpc8315-sata", "fsl,sata-pq2pro; > + reg = <19000 1000>; > + interrupts = <2d 8>; > + interrupt-parent = < &ipic >; > + }; > > * Added labels for ethernet (enet), serial, pci > > (some examples below):
I will make the changes and update you later. - Leo _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
