On 11/28/07, Wolfgang Denk <[EMAIL PROTECTED]> wrote:
> In message <[EMAIL PROTECTED]> you wrote:
> >
> > Regardless what I'm doing in the 2.6 kernel configuration I can't get
> > this RTC running (I activated RTC support and the driver for the M41T00
> > in the configuration).
> > hwclock --debug tells me:
You have to add the i2c device to this table in arch/powerpc/sysdev/fsl_soc.c
static struct i2c_driver_device i2c_devices[] __initdata = {
{"ricoh,rs5c372a", "rtc-rs5c372", "rs5c372a",},
{"ricoh,rs5c372b", "rtc-rs5c372", "rs5c372b",},
{"ricoh,rv5c386", "rtc-rs5c372", "rv5c386",},
{"ricoh,rv5c387a", "rtc-rs5c372", "rv5c387a",},
{"dallas,ds1307", "rtc-ds1307", "ds1307",},
{"dallas,ds1337", "rtc-ds1307", "ds1337",},
{"dallas,ds1338", "rtc-ds1307", "ds1338",},
{"dallas,ds1339", "rtc-ds1307", "ds1339",},
{"dallas,ds1340", "rtc-ds1307", "ds1340",},
{"stm,m41t00", "rtc-ds1307", "m41t00"},
{"dallas,ds1374", "rtc-ds1374", "rtc-ds1374",},
};
Then make a device tree node for it with the address.
[EMAIL PROTECTED] {
compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
reg = <3d40 40>;
interrupts = <2 10 0>;
interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
[EMAIL PROTECTED] {
compatible = "epson,rtc8564";
reg = <51>;
};
};
The device will be named /dev/rtc0. A more update to date version of
hwclock will find it or you can make a symlink from rtc to rtc0.
When it works right:
rtc-pcf8563 1-0051: rtc core: registered rtc-pcf8563 as rtc0
rtc-pcf8563 1-0051: setting system clock to 2007-11-28 16:53:12 UTC (1196268792)
I have a pending series of patches that removes this table and moves
the aliasing into the i2c drivers. It is waiting for a core change to
go into the i2c subsystem.
> > hwclock: Open of /dev/rtc failed, errno=19: No such device.
>
> Well... did you check how your /dev/rtc is set up? It used to be a
> misc device with MAJ=10 MIN=135 in old kernel versions, but now it's
> MAJ=254 MIN=4, i. e. it should look like this:
>
> crw-r--r-- 1 root root 254, 0 Jun 22 18:30 /dev/rtc
>
>
> Best regards,
>
> Wolfgang Denk
>
> --
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
> For every complex problem, there is a solution that is simple, neat,
> and wrong. -- H. L. Mencken
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>
--
Jon Smirl
[EMAIL PROTECTED]
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
