Hello;
While working on i2c support, I've decided to update to a new kernel. In
the process of doing this, I'm not sure I've properly configured the MURAM
node to my device tree (i.e. serial is broken again). Also, does this, in
any way, change the way I offset the early debug transmit descriptor
address?
I tried looking at your cpm tree on git.buserror.net, but it seems you've
taken it down?
-Alan
[EMAIL PROTECTED] {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8248", "fsl,pq2-soc";
ranges = <00000000 e0000000 00053000>;
// Temporary -- will go away once kernel uses ranges for
get_immrbase().
reg = <e0000000 00053000>;
[EMAIL PROTECTED] {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8248-cpm", "fsl,cpm2";
reg = <119c0 30>;
ranges;
[EMAIL PROTECTED] {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 10000>;
[EMAIL PROTECTED] {
compatible = "fsl,cpm-muram-data";
reg = <0 2000 9800 800>;
};
};
[EMAIL PROTECTED] {
compatible = "fsl,mpc8272-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
reg = <119f0 10 115f0 10>;
};
/* Monitor port/SMC1 */
[EMAIL PROTECTED] {
device_type = "serial";
compatible = "fsl,mpc8248-smc-uart",
"fsl,cpm2-smc-uart";
reg = <11a80 20 0 40>;
interrupts = <4 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <7>;
fsl,cpm-command = <1d000000>;
};
/* "Serial" port/SCC1 */
[EMAIL PROTECTED] {
device_type = "serial";
compatible = "fsl,mpc8248-scc-uart",
"fsl,cpm2-scc-uart";
reg = <11a00 20 8000 100>;
interrupts = <28 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <1>;
fsl,cpm-command = <00800000>;
};
/* "Serial" port/SCC4 */
[EMAIL PROTECTED] {
device_type = "serial";
compatible = "fsl,mpc8248-scc-uart",
"fsl,cpm2-scc-uart";
reg = <11a60 20 8300 100>;
interrupts = <2B 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <4>;
fsl,cpm-command = <0CE00000>;
};
[EMAIL PROTECTED] {
device_type = "network";
compatible = "fsl,mpc8248-fcc-enet",
"fsl,cpm2-fcc-enet";
reg = <11300 20 8400 100 11390 1>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <20 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY0>;
linux,network-index = <0>;
fsl,cpm-command = <12000300>;
};
[EMAIL PROTECTED] {
device_type = "network";
compatible = "fsl,mpc8248-fcc-enet",
"fsl,cpm2-fcc-enet";
reg = <11320 20 8500 100 113b0 1>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <21 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY1>;
linux,network-index = <1>;
fsl,cpm-command = <16200300>;
};
[EMAIL PROTECTED] {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc8248-usb",
"fsl,cpm2-usb";
reg = <11b60 18 8b00 100>;
interrupt-parent = <&PIC>;
interrupts = <b 8>;
fsl,cpm-command = <2e600000>;
};
[EMAIL PROTECTED] {
compatible = "fsl,mpc8248-i2c",
"fsl,cpm2-i2c",
"fsl,cpm-i2c";
reg = <11860 20 3c80 30>;
interrupts = <1>;
interrupt-parent = <&PIC>;
fsl,cpm-command = <0010>;
};
};
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
