On Wednesday 14 November 2007, zhangwei zhang wrote: > Hello, I have a problem when using linux-2.6.14(download from > ftp.denx.de) for RTAI on ppc440EP.
RTAI on PPC? I thought RTAI was dead for anything other than X86. And 2.6.14 is quite old. I suggest you use a newer binary version or compile a the image from the current kernel source. > I use the ELDK4.1 and when boot the > uImage I compiled , I always have the problem as following: > > ## Booting image at 00500000 ... > Image Name: Linux-2.6.14 > Image Type: PowerPC Linux Kernel Image (gzip compressed) > Data Size: 1155686 Bytes = 1.1 MB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK > Uncompressing Kernel Image ... OK > > then it stopped . I am afraid that maybe the problem comes from the > config. I have ever use the uImage-DENX-v2.6.14 you offered in > ftp.denx.de/pub/linux/amcc/image/yosemite/ and it works. So can you > send me a config file for 2.6.14 to me? Thank you. Please don't stick with 2.6.14. Download the current kernel: http://www.denx.de/cgi-bin/gitweb.cgi?p=linux-2.6-denx.git;a=summary and there you will find the .config for the Yosemite (arch/ppc/configs/yosemite_defconfig). Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
