This adds support for the Agere ET1011c PHY as found on the AMCC Taishan
board.
Signed-off-by: Stefan Roese <[EMAIL PROTECTED]>
---
drivers/net/ibm_newemac/phy.c | 33 +++++++++++++++++++++++++++++++++
1 files changed, 33 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ibm_newemac/phy.c b/drivers/net/ibm_newemac/phy.c
index 1404457..4270a66 100644
--- a/drivers/net/ibm_newemac/phy.c
+++ b/drivers/net/ibm_newemac/phy.c
@@ -314,6 +314,38 @@ static struct mii_phy_def bcm5248_phy_def = {
.ops = &generic_phy_ops
};
+static int et1011c_init(struct mii_phy *phy)
+{
+ u16 reg_short;
+
+ reg_short = (u16)(phy_read(phy, 0x16));
+ reg_short &= ~(0x7);
+ reg_short |= 0x6; /* RGMII Trace Delay*/
+ phy_write(phy, 0x16, reg_short);
+
+ reg_short = (u16)(phy_read(phy, 0x17));
+ reg_short &= ~(0x40);
+ phy_write(phy, 0x17, reg_short);
+
+ phy_write(phy, 0x1c, 0x74f0);
+ return 0;
+}
+
+static struct mii_phy_ops et1011c_phy_ops = {
+ .init = et1011c_init,
+ .setup_aneg = genmii_setup_aneg,
+ .setup_forced = genmii_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = genmii_read_link
+};
+
+static struct mii_phy_def et1011c_phy_def = {
+ .phy_id = 0x0282f000,
+ .phy_id_mask = 0x0fffff00,
+ .name = "ET1011C Gigabit Ethernet",
+ .ops = &et1011c_phy_ops
+};
+
static int m88e1111_init(struct mii_phy *phy)
{
printk("%s: Marvell 88E1111 Ethernet\n", __FUNCTION__);
@@ -344,6 +376,7 @@ static struct mii_phy_def m88e1111_phy_def = {
};
static struct mii_phy_def *mii_phy_table[] = {
+ &et1011c_phy_def,
&cis8201_phy_def,
&bcm5248_phy_def,
&m88e1111_phy_def,
--
1.5.3.5.561.g140d
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
