I realized that I should have done this from the root level. So here is
the corrected patch.
Signed-off-by: Steve Falco <sfalco at harris.com>
Steven A. Falco wrote:
Hi - I have found a bug in the ARCH=powerpc Walnut BSP. The order of
the ethernet interrupts in the walnut.dts file doesn't match the
documentation. I discovered this when porting the BSP to a custom
board - the ethernet would not work. The attached patch corrects that.
This is the first patch I am submitting, so please advise me if there
is anything I should do differently.
Signed-off-by: Steve Falco <sfalco at harris.com>
diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts
index 27bef06..dd65115 100644
--- a/arch/powerpc/boot/dts/walnut.dts
+++ b/arch/powerpc/boot/dts/walnut.dts
@@ -67,7 +67,7 @@
num-tx-chans = <2>;
num-rx-chans = <1>;
interrupt-parent = <&UIC0>;
- interrupts = <a 4 b 4 c 4 d 4 e 4>;
+ interrupts = <b 4 c 4 a 4 d 4 e 4>;
};
POB0: opb {
@@ -117,7 +117,7 @@
device_type = "network";
compatible = "ibm,emac-405gp", "ibm,emac";
interrupt-parent = <&UIC0>;
- interrupts = <9 4 f 4>;
+ interrupts = <f 4 9 4>;
reg = <ef600800 70>;
mal-device = <&MAL>;
mal-tx-channel = <0 1>;
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
