On Tue, 2007-10-23 at 11:13 -0700, Jeff Mock wrote: > Is the Ocotea board (the original 440GX eval board) still interesting? > I'm wrapping up a project using the 440GX, I started out hacking on the > Ocotea board to get started, but we moved off Ocotea long ago onto our > own hardware. > > I'm cleaning up the lab now that the project is nearly finished and I > would like to give the board to someone that will put it to good use. > I've sponged off this mailing list quite a lot, it's about time I give a > little something back.
Well, the ocotea has an interesting "feature" related to the way the ethernet PHY an EMAC interact which I haven't dealt with in the new EMAC driver at this stage. I -think- the Taishan I have may have the same issue though, in which case I won't need it, but if not, I could have good use (or Josh in Rochester) for one of these. > The board has been hacked a little bit but still works fine. I just > powered it up and it happily booted Linux via TFTP. The boot ROM now > has u-boot, the original PIBs (or whatever) is long gone. All I ask is > that you're self-sufficient and don't bug me too much about it... > > Can someone recommend a good home? Otherwise it will wind up in > storeroom purgatory. > > jeff > > _______________________________________________ > Linuxppc-dev mailing list > Linuxppc-dev@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-dev _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
