> -----Original Message-----
> From: Kumar Gala [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, October 17, 2007 9:55 PM
> To: Li Yang-r58472
> Cc: [EMAIL PROTECTED]; [email protected]
> Subject: Re: [PATCH v4 9/9] add MPC837x MDS board default device tree
>
>
> On Oct 15, 2007, at 9:56 AM, Li Yang wrote:
>
> > Signed-off-by: Li Yang <[EMAIL PROTECTED]>
> > ---
> > arch/powerpc/boot/dts/mpc8377_mds.dts | 281 ++++++++++++++++++++++
> > +++++++++
> > arch/powerpc/boot/dts/mpc8378_mds.dts | 263 ++++++++++++++++++++++
> > +++++++
> > arch/powerpc/boot/dts/mpc8379_mds.dts | 299 ++++++++++++++++++++++
> > +++++++++++
> > 3 files changed, 843 insertions(+), 0 deletions(-) create mode
> > 100644 arch/powerpc/boot/dts/mpc8377_mds.dts
> > create mode 100644 arch/powerpc/boot/dts/mpc8378_mds.dts
> > create mode 100644 arch/powerpc/boot/dts/mpc8379_mds.dts
{snip}
> > + };
> > + };
> > +
> > + memory {
> > + device_type = "memory";
> > + reg = <00000000 20000000>; // 512MB at 0
> > + };
> > +
> > + [EMAIL PROTECTED] {
>
> make this just '[EMAIL PROTECTED]'
>
The current u-boot support uses soc837x. U-boot should be changed first
for [EMAIL PROTECTED] to work.
- Leo
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
