net: Fix new EMAC driver for NAPI changes
This fixes the new EMAC driver for the NAPI updates. The previous patch
by Roland Dreier (already applied) to do that doesn't actually work. This
applies on top of it makes it work on my test Ebony machine.
This patch depends on "net: Add __napi_sycnhronize() to sync with napi poll"
posted previously.
Signed-off-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
---
The old EMAC driver does things a bit differently (doesn't do useful
locking :-) and seems to work with Roland patch. So I'm not going to
touch it unless somebody reports me that it has problems
Index: linux-work/drivers/net/ibm_newemac/mal.c
===================================================================
--- linux-work.orig/drivers/net/ibm_newemac/mal.c 2007-10-16
14:51:11.000000000 +1000
+++ linux-work/drivers/net/ibm_newemac/mal.c 2007-10-16 14:59:23.000000000
+1000
@@ -45,6 +45,8 @@ int __devinit mal_register_commac(struct
return -EBUSY;
}
+ if (list_empty(&mal->list))
+ napi_enable(&mal->napi);
mal->tx_chan_mask |= commac->tx_chan_mask;
mal->rx_chan_mask |= commac->rx_chan_mask;
list_add(&commac->list, &mal->list);
@@ -67,6 +69,8 @@ void __devexit mal_unregister_commac(str
mal->tx_chan_mask &= ~commac->tx_chan_mask;
mal->rx_chan_mask &= ~commac->rx_chan_mask;
list_del_init(&commac->list);
+ if (list_empty(&mal->list))
+ napi_disable(&mal->napi);
spin_unlock_irqrestore(&mal->lock, flags);
}
@@ -182,7 +186,7 @@ static inline void mal_enable_eob_irq(st
set_mal_dcrn(mal, MAL_CFG, get_mal_dcrn(mal, MAL_CFG) | MAL_CFG_EOPIE);
}
-/* synchronized by __LINK_STATE_RX_SCHED bit in ndev->state */
+/* synchronized by NAPI state */
static inline void mal_disable_eob_irq(struct mal_instance *mal)
{
// XXX might want to cache MAL_CFG as the DCR read can be slooooow
@@ -317,8 +321,8 @@ void mal_poll_disable(struct mal_instanc
while (test_and_set_bit(MAL_COMMAC_POLL_DISABLED, &commac->flags))
msleep(1);
- /* Synchronize with the MAL NAPI poller. */
- napi_disable(&mal->napi);
+ /* Synchronize with the MAL NAPI poller */
+ __napi_synchronize(&mal->napi);
}
void mal_poll_enable(struct mal_instance *mal, struct mal_commac *commac)
@@ -326,7 +330,12 @@ void mal_poll_enable(struct mal_instance
smp_wmb();
clear_bit(MAL_COMMAC_POLL_DISABLED, &commac->flags);
- // XXX might want to kick a poll now...
+ /* Feels better to trigger a poll here to catch up with events that
+ * may have happened on this channel while disabled. It will most
+ * probably be delayed until the next interrupt but that's mostly a
+ * non-issue in the context where this is called.
+ */
+ napi_schedule(&mal->napi);
}
static int mal_poll(struct napi_struct *napi, int budget)
@@ -336,8 +345,7 @@ static int mal_poll(struct napi_struct *
int received = 0;
unsigned long flags;
- MAL_DBG2(mal, "poll(%d) %d ->" NL, *budget,
- rx_work_limit);
+ MAL_DBG2(mal, "poll(%d)" NL, budget);
again:
/* Process TX skbs */
list_for_each(l, &mal->poll_list) {
@@ -528,11 +536,12 @@ static int __devinit mal_probe(struct of
}
INIT_LIST_HEAD(&mal->poll_list);
- mal->napi.weight = CONFIG_IBM_NEW_EMAC_POLL_WEIGHT;
- mal->napi.poll = mal_poll;
INIT_LIST_HEAD(&mal->list);
spin_lock_init(&mal->lock);
+ netif_napi_add(NULL, &mal->napi, mal_poll,
+ CONFIG_IBM_NEW_EMAC_POLL_WEIGHT);
+
/* Load power-on reset defaults */
mal_reset(mal);
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
