From: Masashi Kimoto <[EMAIL PROTECTED]>

Fix the black and white stripes issue with WUXGA monitor via HDMI.

It seems that when we use a VESA resolution from boot up, the AV settings
driver could not be initialized correctly.
In that case we need a dummy packet before VESA setting.

[Geert] Refactored to reduce code duplication.

Signed-off-by: Geert Uytterhoeven <[EMAIL PROTECTED]>
CC: Geoff Levand <[EMAIL PROTECTED]>
---
 drivers/ps3/ps3av.c |   58 ++++++++++++++++++++++++++++++++++------------------
 1 files changed, 38 insertions(+), 20 deletions(-)

--- a/drivers/ps3/ps3av.c
+++ b/drivers/ps3/ps3av.c
@@ -491,10 +491,10 @@ static int ps3av_set_videomode(void)
        return 0;
 }
 
-static void ps3av_set_videomode_cont(u32 id, u32 old_id)
+static void ps3av_set_videomode_packet(u32 id)
 {
        struct ps3av_pkt_avb_param avb_param;
-       int i;
+       unsigned int i;
        u32 len = 0, av_video_cs;
        const struct avset_video_mode *video_mode;
        int res;
@@ -507,24 +507,6 @@ static void ps3av_set_videomode_cont(u32
                                        ps3av->av_hw_conf.num_of_avmulti;
        avb_param.num_of_av_audio_pkt = 0;
 
-       /* video signal off */
-       ps3av_set_video_disable_sig();
-
-       /* Retail PS3 product doesn't support this */
-       if (id & PS3AV_MODE_HDCP_OFF) {
-               res = ps3av_cmd_av_hdmi_mode(PS3AV_CMD_AV_HDMI_HDCP_OFF);
-               if (res == PS3AV_STATUS_UNSUPPORTED_HDMI_MODE)
-                       dev_dbg(&ps3av->dev->core, "Not supported\n");
-               else if (res)
-                       dev_dbg(&ps3av->dev->core,
-                               "ps3av_cmd_av_hdmi_mode failed\n");
-       } else if (old_id & PS3AV_MODE_HDCP_OFF) {
-               res = ps3av_cmd_av_hdmi_mode(PS3AV_CMD_AV_HDMI_MODE_NORMAL);
-               if (res < 0 && res != PS3AV_STATUS_UNSUPPORTED_HDMI_MODE)
-                       dev_dbg(&ps3av->dev->core,
-                               "ps3av_cmd_av_hdmi_mode failed\n");
-       }
-
        /* video_pkt */
        for (i = 0; i < avb_param.num_of_video_pkt; i++)
                len += ps3av_cmd_set_video_mode(&avb_param.buf[len],
@@ -555,6 +537,42 @@ static void ps3av_set_videomode_cont(u32
                       __func__);
        else if (res)
                dev_dbg(&ps3av->dev->core, "ps3av_cmd_avb_param failed\n");
+}
+
+static void ps3av_set_videomode_cont(u32 id, u32 old_id)
+{
+       static int vesa;
+       int res;
+
+       /* video signal off */
+       ps3av_set_video_disable_sig();
+
+       /*
+        * AV backend needs non-VESA mode setting at least one time
+        * when VESA mode is used.
+        */
+       if (vesa == 0 && (id & PS3AV_MODE_MASK) >= 11) {
+               /* vesa mode */
+               ps3av_set_videomode_packet(2);  /* 480P */
+       }
+       vesa = 1;
+
+       /* Retail PS3 product doesn't support this */
+       if (id & PS3AV_MODE_HDCP_OFF) {
+               res = ps3av_cmd_av_hdmi_mode(PS3AV_CMD_AV_HDMI_HDCP_OFF);
+               if (res == PS3AV_STATUS_UNSUPPORTED_HDMI_MODE)
+                       dev_dbg(&ps3av->dev->core, "Not supported\n");
+               else if (res)
+                       dev_dbg(&ps3av->dev->core,
+                               "ps3av_cmd_av_hdmi_mode failed\n");
+       } else if (old_id & PS3AV_MODE_HDCP_OFF) {
+               res = ps3av_cmd_av_hdmi_mode(PS3AV_CMD_AV_HDMI_MODE_NORMAL);
+               if (res < 0 && res != PS3AV_STATUS_UNSUPPORTED_HDMI_MODE)
+                       dev_dbg(&ps3av->dev->core,
+                               "ps3av_cmd_av_hdmi_mode failed\n");
+       }
+
+       ps3av_set_videomode_packet(id);
 
        msleep(1500);
        /* av video mute */

-- 
With kind regards,
 
Geert Uytterhoeven
Software Architect

Sony Network and Software Technology Center Europe
The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium
 
Phone:    +32 (0)2 700 8453     
Fax:      +32 (0)2 700 8622     
E-mail:   [EMAIL PROTECTED]     
Internet: http://www.sony-europe.com/
        
Sony Network and Software Technology Center Europe      
A division of Sony Service Centre (Europe) N.V. 
Registered office: Technologielaan 7 · B-1840 Londerzeel · Belgium    
VAT BE 0413.825.160 · RPR Brussels     
Fortis Bank Zaventem · Swift GEBABEBB08A · IBAN BE39001382358619

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Reply via email to