On Tuesday 25 September 2007, Stefan Roese wrote: > On Tuesday 25 September 2007, Andrew Liu wrote: > > I have tested it on linux-2.6.19 which is from AMCC website , linux > > 2.6.21.7 which is from linux mainline and linux-2.6.23.rc7 which is > > from git://www.denx.de/git/linux-2.6-denx.git > > Have the same problem. > > I don't understand, why after enabling this PCI interrupts. in so > > short time, produce 100,000 interrupt request (25: 100000 UIC0 > > Level eth2). > > Because the interrupt is somehow not acknowledged in the PCI device. > > I will test this on my Yosemite and let you know.
I just tested on my Yellowstone, which is nearly identical to the Yosemite. And it works just fine with an Intel EEPRO/100. Could you test another PCI board (ethernet, IDE, USB...)? Or do you have access to another Yosemite or Yellowstone board? Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED] ===================================================================== _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
