On Sep 11, 2007, at 12:20 PM, Olof Johansson wrote: > On Fri, Aug 17, 2007 at 12:03:48AM -0500, Kumar Gala wrote: >> >> Signed-off-by: Kumar Gala <[EMAIL PROTECTED]> >> --- >> arch/powerpc/boot/dts/mpc8544ds.dts | 88 ++++------ >> arch/powerpc/boot/dts/mpc8641_hpcn.dts | 114 +++---------- >> arch/powerpc/platforms/85xx/Kconfig | 1 + >> arch/powerpc/platforms/85xx/mpc8544_ds.c | 214 + >> +---------------------- >> arch/powerpc/platforms/86xx/Kconfig | 1 + >> arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 224 + >> +----------------------- >> arch/powerpc/platforms/Kconfig | 8 + >> arch/powerpc/platforms/Makefile | 3 + >> arch/powerpc/platforms/fsl_uli1575.c | 255 ++++++++++++++++ >> ++++++++++++ >> 9 files changed, 363 insertions(+), 545 deletions(-) >> create mode 100644 arch/powerpc/platforms/fsl_uli1575.c >> > > Since when do we add code directly under powerpc/platforms? Isn't that > what we have sysdev for? > > I know this is already picked up, but I just noticed it when > looking at > Kumar's 8572 patch. :-(
I put it in platforms since it was related to the boards not the chips. We can go around about what sysdev actual means, but I'm using the assumption that its for processor & bridges (for discrete processors 10x, mv640x0, etc). Things that are board specific like the ULI I'm putting under platforms/ - k _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
