On Tuesday 14 August 2007, Valentine Barshak wrote:
> AMCC Sequoia device tree.
Please find some comments below.
> Signed-off-by: Valentine Barshak <[EMAIL PROTECTED]>
> ---
> arch/powerpc/boot/dts/sequoia.dts | 289
> ++++++++++++++++++++++++++++++++++++++ 1 files changed, 289 insertions(+)
>
> diff -ruN linux-2.6.orig/arch/powerpc/boot/dts/sequoia.dts
> linux-2.6/arch/powerpc/boot/dts/sequoia.dts ---
> linux-2.6.orig/arch/powerpc/boot/dts/sequoia.dts 1970-01-01
> 03:00:00.000000000 +0300 +++
> linux-2.6/arch/powerpc/boot/dts/sequoia.dts 2007-08-14 19:32:56.000000000
> +0400 @@ -0,0 +1,289 @@
> +/*
> + * Device Tree Source for AMCC Sequoia
> + *
> + * Based on Bamboo code by Josh Boyer <[EMAIL PROTECTED]>
> + * Copyright (c) 2006, 2007 IBM Corp.
> + *
> + * FIXME: Draft only!
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without
> + * any warranty of any kind, whether express or implied.
> + *
> + */
> +
> +/ {
> + #address-cells = <2>;
> + #size-cells = <1>;
> + model = "amcc,sequoia";
> + compatible = "amcc,sequoia";
> + dcr-parent = <&/cpus/PowerPC,[EMAIL PROTECTED]>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + PowerPC,[EMAIL PROTECTED] {
> + device_type = "cpu";
> + reg = <0>;
> + clock-frequency = <0>; /* Filled in by zImage */
> + timebase-frequency = <0>; /* Filled in by zImage */
> + i-cache-line-size = <20>;
> + d-cache-line-size = <20>;
> + i-cache-size = <8000>;
> + d-cache-size = <8000>;
> + dcr-controller;
> + dcr-access-method = "native";
> + };
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0 0 0>; /* Filled in by zImage */
> + };
> +
> + UIC0: interrupt-controller0 {
> + compatible = "ibm,uic-440epx","ibm,uic";
> + interrupt-controller;
> + cell-index = <0>;
> + dcr-reg = <0c0 009>;
> + #address-cells = <0>;
> + #size-cells = <0>;
> + #interrupt-cells = <2>;
> + };
> +
> + UIC1: interrupt-controller1 {
> + compatible = "ibm,uic-440epx","ibm,uic";
> + interrupt-controller;
> + cell-index = <1>;
> + dcr-reg = <0d0 009>;
> + #address-cells = <0>;
> + #size-cells = <0>;
> + #interrupt-cells = <2>;
> + interrupts = <1e 4 1f 4>; /* cascade */
> + interrupt-parent = <&UIC0>;
> + };
> +
> + UIC2: interrupt-controller2 {
> + compatible = "ibm,uic-440epx","ibm,uic";
> + interrupt-controller;
> + cell-index = <2>;
> + dcr-reg = <0e0 009>;
> + #address-cells = <0>;
> + #size-cells = <0>;
> + #interrupt-cells = <2>;
> + interrupts = <1c 4 1d 4>; /* cascade */
> + interrupt-parent = <&UIC0>;
> + };
> +
> + SDR0: sdr {
> + compatible = "ibm,sdr-440epx", "ibm,sdr-440ep";
> + dcr-reg = <00e 002>;
> + };
> +
> + CPR0: cpr {
> + compatible = "ibm,cpr-440epx", "ibm,sdr-440ep";
sdr-440ep? I assume you really mean:
+ compatible = "ibm,cpr-440epx", "ibm,cpr-440ep";
> + dcr-reg = <00c 002>;
> + };
> +
> + plb {
> + compatible = "ibm,plb-440epx", "ibm,plb4";
> + #address-cells = <2>;
> + #size-cells = <1>;
> + ranges;
> + clock-frequency = <0>; /* Filled in by zImage */
> +
> + SDRAM0: sdram {
> + device_type = "memory-controller";
> + compatible = "ibm,sdram-44x-ddr2denali";
> + dcr-reg = <010 2>;
> + };
> +
> + DMA0: dma {
> + compatible = "ibm,dma-440epx", "ibm,dma-4xx";
> + dcr-reg = <100 027>;
> + };
> +
> + MAL0: mcmal {
> + compatible = "ibm,mcmal-440epx", "ibm,mcmal-440spe",
> "ibm,mcmal2";
> + dcr-reg = <180 62>;
> + num-tx-chans = <4>;
> + num-rx-chans = <4>;
> + interrupt-parent = <&MAL0>;
> + interrupts = <0 1 2 3 4>;
> + #interrupt-cells = <1>;
> + #address-cells = <0>;
> + #size-cells = <0>;
> + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
> + /*RXEOB*/ 1 &UIC0 b 4
> + /*SERR*/ 2 &UIC1 0 4
> + /*TXDE*/ 3 &UIC1 1 4
> + /*RXDE*/ 4 &UIC1 2 4>;
> + interrupt-map-mask = <ffffffff>;
> + };
> +
> + POB0: opb {
> + compatible = "ibm,opb-440epx", "ibm,opb";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + /* Bamboo is oddball in the 44x world and doesn't use
> the ERPN
> + * bits.
> + */
Bamboo? And the 440EPx does use the ERPN bits.
> + ranges = <00000000 1 00000000 80000000
> + 80000000 1 80000000 80000000>;
> + interrupt-parent = <&UIC1>;
> + interrupts = <7 4>;
> + clock-frequency = <0>; /* Filled in by zImage */
> +
> + EBC0: ebc {
> + compatible = "ibm,ebc-440epx";
> + dcr-reg = <012 2>;
> + #address-cells = <2>;
> + #size-cells = <1>;
> + clock-frequency = <0>; /* Filled in by zImage */
> + interrupts = <5 1>;
> + interrupt-parent = <&UIC1>;
> +
> + [EMAIL PROTECTED],0 {
> + device_type = "rom";
> + compatible = "direct-mapped";
> + probe-type = "CFI";
> + bank-width = <2>;
> + partitions = < 0 180000
> + 180000 200000
> + 380000 3aa0000
> + 3e20000 140000
> + 3f60000 40000
> + 3fa0000 60000>;
> + partition-names = "Kernel", "ramdisk",
> "file system",
> + "kozio", "env",
> "u-boot";
> + reg = <0 000000 4000000>;
> + };
> +
> + };
> +
> + UART0: [EMAIL PROTECTED] {
> + device_type = "serial";
> + compatible = "ns16550";
> + reg = <ef600300 8>;
> + virtual-reg = <ef600300>;
> + clock-frequency = <0>; /* Filled in by zImage */
> + current-speed = <1c200>;
> + interrupt-parent = <&UIC0>;
> + interrupts = <0 4>;
> + };
> +
> + UART1: [EMAIL PROTECTED] {
> + device_type = "serial";
> + compatible = "ns16550";
> + reg = <ef600400 8>;
> + virtual-reg = <ef600400>;
> + clock-frequency = <0>;
> + current-speed = <0>;
> + interrupt-parent = <&UIC0>;
> + interrupts = <1 4>;
> + };
> +
> + UART2: [EMAIL PROTECTED] {
> + device_type = "serial";
> + compatible = "ns16550";
> + reg = <ef600500 8>;
> + virtual-reg = <ef600500>;
> + clock-frequency = <0>;
> + current-speed = <0>;
> + interrupt-parent = <&UIC1>;
> + interrupts = <3 4>;
> + };
> +
> + UART3: [EMAIL PROTECTED] {
> + device_type = "serial";
> + compatible = "ns16550";
> + reg = <ef600600 8>;
> + virtual-reg = <ef600600>;
> + clock-frequency = <0>;
> + current-speed = <0>;
> + interrupt-parent = <&UIC1>;
> + interrupts = <4 4>;
> + };
> +
> + IIC0: [EMAIL PROTECTED] {
> + device_type = "i2c";
> + compatible = "ibm,iic-440epx", "ibm,iic";
> + reg = <ef600700 14>;
> + interrupt-parent = <&UIC0>;
> + interrupts = <2 4>;
> + };
> +
> + IIC1: [EMAIL PROTECTED] {
> + device_type = "i2c";
> + compatible = "ibm,iic-440epx", "ibm,iic";
> + reg = <ef600800 14>;
> + interrupt-parent = <&UIC0>;
> + interrupts = <7 4>;
> + };
> +
> + ZMII0: [EMAIL PROTECTED] {
> + device_type = "zmii-interface";
> + compatible = "ibm,zmii-440epx", "ibm,zmii";
> + reg = <ef600d00 c>;
> + };
> +
> + EMAC0: [EMAIL PROTECTED] {
> + linux,network-index = <0>;
> + device_type = "network";
> + compatible = "ibm,emac-440epx",
> "ibm,emac-440spe", "ibm,emac4";
> + interrupt-parent = <&EMAC0>;
> + interrupts = <0 1>;
> + #interrupt-cells = <1>;
> + #address-cells = <0>;
> + #size-cells = <0>;
> + interrupt-map = </*Status*/ 0 &UIC0 18 4
> + /*Wake*/ 1 &UIC1 1d 4>;
> + reg = <ef600e00 70>;
> + local-mac-address = [000000000000];
> + mal-device = <&MAL0>;
> + mal-tx-channel = <0 1>;
> + mal-rx-channel = <0>;
> + cell-index = <0>;
> + max-frame-size = <5dc>;
> + rx-fifo-size = <1000>;
> + tx-fifo-size = <800>;
> + phy-mode = "rmii";
> + phy-map = <00000000>;
> + zmii-device = <&ZMII0>;
> + zmii-channel = <0>;
> + };
> +
> + EMAC1: [EMAIL PROTECTED] {
> + linux,network-index = <1>;
> + device_type = "network";
> + compatible = "ibm,emac-440epx",
> "ibm,emac-440spe", "ibm,emac4";
> + interrupt-parent = <&EMAC1>;
> + interrupts = <0 1>;
> + #interrupt-cells = <1>;
> + #address-cells = <0>;
> + #size-cells = <0>;
> + interrupt-map = </*Status*/ 0 &UIC0 19 4
> + /*Wake*/ 1 &UIC1 1f 4>;
> + reg = <ef600f00 70>;
> + local-mac-address = [000000000000];
> + mal-device = <&MAL0>;
> + mal-tx-channel = <2 3>;
> + mal-rx-channel = <1>;
> + cell-index = <1>;
> + max-frame-size = <5dc>;
> + rx-fifo-size = <1000>;
> + tx-fifo-size = <800>;
> + phy-mode = "rmii";
> + phy-map = <00000000>;
> + zmii-device = <&ZMII0>;
> + zmii-channel = <1>;
> + };
> + };
> + };
> +
> + chosen {
> + linux,stdout-path = "/plb/opb/[EMAIL PROTECTED]";
> + bootargs = "console=ttyS0,115200";
> + };
> +};
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: [EMAIL PROTECTED]
=====================================================================
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
