There are some variables and functions that we should place in init
section. And this patch changes some '__devinit' to '__init', because
the device is platform device and not hot-pluggable.
Signed-off-by: Kou Ishizaki <[EMAIL PROTECTED]>
---
Index: linux-powerpc-git/arch/powerpc/platforms/celleb/scc_epci.c
===================================================================
--- linux-powerpc-git.orig/arch/powerpc/platforms/celleb/scc_epci.c
+++ linux-powerpc-git/arch/powerpc/platforms/celleb/scc_epci.c
@@ -283,7 +283,7 @@ struct pci_ops celleb_epci_ops = {
};
/* to be moved in FW */
-static int __devinit celleb_epci_init(struct pci_controller *hose)
+static int __init celleb_epci_init(struct pci_controller *hose)
{
u32 val;
volatile void __iomem *reg, *epci_base;
@@ -403,7 +403,7 @@ static int __devinit celleb_epci_init(st
return 0;
}
-int __devinit celleb_setup_epci(struct device_node *node,
+int __init celleb_setup_epci(struct device_node *node,
struct pci_controller *hose)
{
struct resource r;
Index: linux-powerpc-git/arch/powerpc/platforms/celleb/setup.c
===================================================================
--- linux-powerpc-git.orig/arch/powerpc/platforms/celleb/setup.c
+++ linux-powerpc-git/arch/powerpc/platforms/celleb/setup.c
@@ -73,7 +73,7 @@ static void celleb_show_cpuinfo(struct s
of_node_put(root);
}
-static int celleb_machine_type_hack(char *ptr)
+static int __init celleb_machine_type_hack(char *ptr)
{
strncpy(celleb_machine_type, ptr, sizeof(celleb_machine_type));
celleb_machine_type[sizeof(celleb_machine_type)-1] = 0;
@@ -135,7 +135,7 @@ static void celleb_kexec_cpu_down(int cr
}
#endif
-static struct of_device_id celleb_bus_ids[] = {
+static struct of_device_id celleb_bus_ids[] __initdata = {
{ .type = "scc", },
{ .type = "ioif", }, /* old style */
{},
Index: linux-powerpc-git/arch/powerpc/platforms/celleb/scc_sio.c
===================================================================
--- linux-powerpc-git.orig/arch/powerpc/platforms/celleb/scc_sio.c
+++ linux-powerpc-git/arch/powerpc/platforms/celleb/scc_sio.c
@@ -28,12 +28,12 @@
/* sio irq0=0xb00010022 irq0=0xb00010023 irq2=0xb00010024
mmio=0xfff000-0x1000,0xff2000-0x1000 */
-static int txx9_serial_bitmap = 0;
+static int txx9_serial_bitmap __initdata = 0;
static struct {
uint32_t offset;
uint32_t index;
-} txx9_scc_tab[3] = {
+} txx9_scc_tab[3] __initdata = {
{ 0x300, 0 }, /* 0xFFF300 */
{ 0x400, 0 }, /* 0xFFF400 */
{ 0x800, 1 } /* 0xFF2800 */
@@ -79,7 +79,7 @@ static int __init txx9_serial_init(void)
return 0;
}
-static int txx9_serial_config(char *ptr)
+static int __init txx9_serial_config(char *ptr)
{
int i;
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
