1. Only map 512K of the IMMR, rather than 8M, to avoid conflicting with
the default ioremap region.
2. The wrong register was being loaded into SPRN_MD_RPN.
Signed-off-by: Scott Wood <[EMAIL PROTECTED]>
---
Apparently I missed sending this one yesterday...
arch/powerpc/kernel/head_8xx.S | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 7488f30..c1469f3 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -701,7 +701,7 @@ initial_mmu:
mtspr SPRN_MI_AP, r8
mtspr SPRN_MD_AP, r8
- /* Map another 8 MByte at the IMMR to get the processor
+ /* Map another 512 KByte at the IMMR to get the processor
* internal registers (among other things).
*/
#ifdef CONFIG_PIN_TLB
@@ -714,7 +714,7 @@ initial_mmu:
mr r8, r9 /* Create vaddr for TLB */
ori r8, r8, MD_EVALID /* Mark it valid */
mtspr SPRN_MD_EPN, r8
- li r8, MD_PS8MEG /* Set 8M byte page */
+ li r8, MD_PS512K /* Set 512K byte page */
ori r8, r8, MD_SVALID /* Make it valid */
mtspr SPRN_MD_TWC, r8
mr r8, r9 /* Create paddr for TLB */
@@ -736,13 +736,13 @@ initial_mmu:
mtspr SPRN_MD_TWC, r9
li r11, MI_BOOTINIT /* Create RPN for address 0 */
addis r11, r11, 0x0080 /* Add 8M */
- mtspr SPRN_MD_RPN, r8
+ mtspr SPRN_MD_RPN, r11
addis r8, r8, 0x0080 /* Add 8M */
mtspr SPRN_MD_EPN, r8
mtspr SPRN_MD_TWC, r9
addis r11, r11, 0x0080 /* Add 8M */
- mtspr SPRN_MD_RPN, r8
+ mtspr SPRN_MD_RPN, r11
#endif
/* Since the cache is enabled according to the information we
--
1.5.0.3
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
