Add a bootwrapper for Bamboo
Signed-off-by: Josh Boyer <[EMAIL PROTECTED]>
---
arch/powerpc/boot/44x.h | 1
arch/powerpc/boot/Makefile | 5 -
arch/powerpc/boot/bamboo.c | 126 ++++++++++++++++++++++++++++++++++++
arch/powerpc/boot/dcr.h | 11 +++
arch/powerpc/boot/treeboot-bamboo.c | 27 +++++++
5 files changed, 168 insertions(+), 2 deletions(-)
--- linux-2.6.orig/arch/powerpc/boot/Makefile
+++ linux-2.6/arch/powerpc/boot/Makefile
@@ -44,10 +44,10 @@ $(addprefix $(obj)/,$(zlib) gunzip_util.
src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \
ns16550.c serial.c simple_alloc.c div64.S util.S \
gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
- 4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c
+ 4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c
src-plat := of.c cuboot-83xx.c cuboot-85xx.c holly.c \
cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
- ps3-head.S ps3-hvcall.S ps3.c treeboot-walnut.c
+ ps3-head.S ps3-hvcall.S ps3.c treeboot-walnut.c
treeboot-bamboo.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -143,6 +143,7 @@ image-$(CONFIG_PPC_83xx) += cuImage.83x
image-$(CONFIG_PPC_85xx) += cuImage.85xx
image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
image-$(CONFIG_WALNUT) += treeImage.walnut
+image-$(CONFIG_BAMBOO) += treeImage.bamboo
endif
# For 32-bit powermacs, build the COFF and miboot images
--- /dev/null
+++ linux-2.6/arch/powerpc/boot/bamboo.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright IBM Corporation, 2007
+ * Josh Boyer <[EMAIL PROTECTED]>
+ *
+ * Based on ebony wrapper:
+ * Copyright 2007 David Gibson, IBM Corporation.
+ *
+ * Clocking code based on code by:
+ * Stefan Roese <[EMAIL PROTECTED]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the License
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "string.h"
+#include "stdio.h"
+#include "page.h"
+#include "ops.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "44x.h"
+
+extern char _dtb_start[];
+extern char _dtb_end[];
+
+#define SPRN_CCR1 0x378
+void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk)
+{
+ u32 cpu, plb, opb, ebc, tb, uart0, m, vco;
+ u32 reg;
+ u32 fwdva, fwdvb, fbdv, lfbdv, opbdv0, perdv0, spcid0, prbdv0, tmp;
+
+ mtdcr(DCRN_CPR0_ADDR, CPR0_PLLD0);
+ reg = mfdcr(DCRN_CPR0_DATA);
+ tmp = (reg & 0x000F0000) >> 16;
+ fwdva = tmp ? tmp : 16;
+ tmp = (reg & 0x00000700) >> 8;
+ fwdvb = tmp ? tmp : 8;
+ tmp = (reg & 0x1F000000) >> 24;
+ fbdv = tmp ? tmp : 32;
+ lfbdv = (reg & 0x0000007F);
+
+ mtdcr(DCRN_CPR0_ADDR, CPR0_OPBD0);
+ reg = mfdcr(DCRN_CPR0_DATA);
+ tmp = (reg & 0x03000000) >> 24;
+ opbdv0 = tmp ? tmp : 4;
+
+ mtdcr(DCRN_CPR0_ADDR, CPR0_PERD0);
+ reg = mfdcr(DCRN_CPR0_DATA);
+ tmp = (reg & 0x07000000) >> 24;
+ perdv0 = tmp ? tmp : 8;
+
+ mtdcr(DCRN_CPR0_ADDR, CPR0_PRIMBD0);
+ reg = mfdcr(DCRN_CPR0_DATA);
+ tmp = (reg & 0x07000000) >> 24;
+ prbdv0 = tmp ? tmp : 8;
+
+ mtdcr(DCRN_CPR0_ADDR, CPR0_SCPID);
+ reg = mfdcr(DCRN_CPR0_DATA);
+ tmp = (reg & 0x03000000) >> 24;
+ spcid0 = tmp ? tmp : 4;
+
+ /* Calculate M */
+ mtdcr(DCRN_CPR0_ADDR, CPR0_PLLC0);
+ reg = mfdcr(DCRN_CPR0_DATA);
+ tmp = (reg & 0x03000000) >> 24;
+ if (tmp == 0) { /* PLL output */
+ tmp = (reg & 0x20000000) >> 29;
+ if (!tmp) /* PLLOUTA */
+ m = fbdv * lfbdv * fwdva;
+ else
+ m = fbdv * lfbdv * fwdvb;
+ }
+ else if (tmp == 1) /* CPU output */
+ m = fbdv * fwdva;
+ else
+ m = perdv0 * opbdv0 * fwdvb;
+
+ vco = (m * sysclk) + (m >> 1);
+ cpu = vco / fwdva;
+ plb = vco / fwdvb / prbdv0;
+ opb = plb / opbdv0;
+ ebc = plb / perdv0;
+
+ /* FIXME */
+ uart0 = ser_clk;
+
+ /* Figure out timebase. Either CPU or default TmrClk */
+ asm volatile (
+ "mfspr %0,%1\n"
+ :
+ "=&r"(reg) : "i"(SPRN_CCR1));
+ if (reg & 0x0080)
+ tb = 25000000; /* TmrClk is 25MHz */
+ else
+ tb = cpu;
+
+ dt_fixup_cpu_clocks(cpu, tb, 0);
+ dt_fixup_clock("/plb", plb);
+ dt_fixup_clock("/plb/opb", opb);
+ dt_fixup_clock("/plb/opb/ebc", ebc);
+ dt_fixup_clock("/plb/opb/[EMAIL PROTECTED]", uart0);
+ dt_fixup_clock("/plb/opb/[EMAIL PROTECTED]", uart0);
+ dt_fixup_clock("/plb/opb/[EMAIL PROTECTED]", uart0);
+ dt_fixup_clock("/plb/opb/[EMAIL PROTECTED]", uart0);
+}
+
+static void bamboo_fixups(void)
+{
+ unsigned long sysclk = 33333333;
+ ibm440ep_fixup_clocks(sysclk, 11059200);
+ ibm4xx_fixup_memsize();
+ ibm4xx_reset_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
+}
+
+void bamboo_init(void)
+{
+ platform_ops.fixups = bamboo_fixups;
+ platform_ops.exit = ibm44x_dbcr_reset;
+ ft_init(_dtb_start, 0, 32);
+ serial_console_init();
+}
--- linux-2.6.orig/arch/powerpc/boot/44x.h
+++ linux-2.6/arch/powerpc/boot/44x.h
@@ -11,5 +11,6 @@
#define _PPC_BOOT_44X_H_
void ebony_init(void *mac0, void *mac1);
+void bamboo_init(void);
#endif /* _PPC_BOOT_44X_H_ */
--- /dev/null
+++ linux-2.6/arch/powerpc/boot/treeboot-bamboo.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright IBM Corporation, 2007
+ * Josh Boyer <[EMAIL PROTECTED]>
+ *
+ * Based on ebony wrapper:
+ * Copyright 2007 David Gibson, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the License
+ */
+#include "ops.h"
+#include "stdio.h"
+#include "44x.h"
+
+extern char _end[];
+
+BSS_STACK(4096);
+
+void platform_init(void)
+{
+ unsigned long end_of_ram = 0x8000000;
+ unsigned long avail_ram = end_of_ram - (unsigned long)_end;
+
+ simple_alloc_init(_end, avail_ram, 32, 64);
+ bamboo_init();
+}
--- linux-2.6.orig/arch/powerpc/boot/dcr.h
+++ linux-2.6/arch/powerpc/boot/dcr.h
@@ -123,4 +123,15 @@ static const unsigned long sdram_bxcr[]
#define DCRN_MAL0_CFG 0x180
+/* 440EP Clock/Power-on Reset regs */
+#define DCRN_CPR0_ADDR 0xc
+#define DCRN_CPR0_DATA 0xd
+#define CPR0_PLLD0 0x60
+#define CPR0_OPBD0 0xc0
+#define CPR0_PERD0 0xe0
+#define CPR0_PRIMBD0 0xa0
+#define CPR0_SCPID 0x120
+#define CPR0_PLLC0 0x40
+
+
#endif /* _PPC_BOOT_DCR_H_ */
--
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
