The various embedded 6xx systems can easily coexist
in one kernel together with the other 6xx based systems,
so there is no strict reason to keep them separate.
This also fixes a problem introduced in one earlier
patch, where the embedded 74xx based systems could
not automatically select altivec any more.
Signed-off-by: Arnd Bergmann <[EMAIL PROTECTED]>
---
Index: linux-2.6/arch/powerpc/platforms/Kconfig
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/Kconfig
+++ linux-2.6/arch/powerpc/platforms/Kconfig
@@ -12,10 +12,6 @@ config PPC_MULTIPLATFORM
RS/6000 machine, an Apple machine, or a PReP, CHRP,
Maple or Cell-based machine.
-config EMBEDDED6xx
- bool "Embedded 6xx/7xx/7xxx-based board"
- depends on PPC32 && (BROKEN||BROKEN_ON_SMP)
-
config PPC_82xx
bool "Freescale 82xx"
depends on 6xx
Index: linux-2.6/arch/powerpc/platforms/embedded6xx/Kconfig
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/embedded6xx/Kconfig
+++ linux-2.6/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -1,9 +1,10 @@
-choice
- prompt "Machine Type"
- depends on EMBEDDED6xx
+config EMBEDDED6xx
+ bool "Embedded 6xx/7xx/7xxx-based boards"
+ depends on PPC32 && (BROKEN||BROKEN_ON_SMP) && PPC_MULTIPLATFORM
config LINKSTATION
bool "Linkstation / Kurobox(HG) from Buffalo"
+ depends on EMBEDDED6xx
select MPIC
select FSL_SOC
select PPC_UDBG_16550 if SERIAL_8250
@@ -18,6 +19,7 @@ config LINKSTATION
config MPC7448HPC2
bool "Freescale MPC7448HPC2(Taiga)"
+ depends on EMBEDDED6xx
select TSI108_BRIDGE
select DEFAULT_UIMAGE
select PPC_UDBG_16550
@@ -28,6 +30,7 @@ config MPC7448HPC2
config PPC_HOLLY
bool "PPC750GX/CL with TSI10x bridge (Hickory/Holly)"
+ depends on EMBEDDED6xx
select TSI108_BRIDGE
select PPC_UDBG_16550
select WANT_DEVICE_TREE
@@ -38,13 +41,13 @@ config PPC_HOLLY
config PPC_PRPMC2800
bool "Motorola-PrPMC2800"
+ depends on EMBEDDED6xx
select MV64X60
select NOT_COHERENT_CACHE
select WANT_DEVICE_TREE
select CPU_7450
help
This option enables support for the Motorola PrPMC2800 board
-endchoice
config TSI108_BRIDGE
bool
--
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
