This patch adds DMA sector to Documentation/powerpc/booting-without-of.txt file.

Signed-off-by: Zhang Wei <[EMAIL PROTECTED]>
Signed-off-by: Ebony Zhu <[EMAIL PROTECTED]>
---
 Documentation/powerpc/booting-without-of.txt |   60 ++++++++++++++++++++++++++
 1 files changed, 60 insertions(+), 0 deletions(-)

diff --git a/Documentation/powerpc/booting-without-of.txt 
b/Documentation/powerpc/booting-without-of.txt
index c169299..08c619f 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1790,6 +1790,66 @@ platforms are moved over to use the 
flattened-device-tree model.
                partition-names = "fs\0firmware";
        };
 
+   k) DMA
+
+   This sector define DMA for dma-engine driver of Freescale
+   MPC8xxx silicon. For each DMA setor, you should define
+   channels included.
+   Please see below 'l) DMA channel' for DMA channel's definition.
+
+   Required properties:
+
+    - compatible : Should be "fsl,mpc8xxx-dma"
+    - reg : Offset and length of the register set for the device
+    - ranges : Should be defined as specified in 1) to describe the
+               DMA controller's register.
+
+  Example:
+       [EMAIL PROTECTED]
+               compatible = "fsl,mpc8xxx-dma";
+               reg = <21000 100>;
+               ranges = <0 21000 1000>;
+               [EMAIL PROTECTED]
+                       reg = <100 80>;
+                       extended;
+                       reserved;
+                       interrupt-parent = <&mpic>;
+                       interrupts = <14 2>;
+               };
+               [EMAIL PROTECTED]
+                       reg = <180 80>;
+                       extended;
+                       reserved;
+                       interrupt-parent = <&mpic>;
+                       interrupts = <15 2>;
+               };
+               [EMAIL PROTECTED]
+                       reg = <200 80>;
+                       extended;
+                       interrupt-parent = <&mpic>;
+                       interrupts = <16 2>;
+               };
+               [EMAIL PROTECTED]
+                       reg = <280 80>;
+                       extended;
+                       interrupt-parent = <&mpic>;
+                       interrupts = <17 2>;
+               };
+       };
+
+   l) DMA channel
+
+   Required properties:
+
+    - reg : Offset and length of the register set for the device
+
+   Recommended properties :
+
+    - extended : Set the DMA channel to work at extended chain mode.
+                 If not set, the DMA channel will work at basic
+                 chain mode.
+    - reserved : Reserve the DMA channel to device.
+
    More devices will be defined as this spec matures.
 
 VII - Specifying interrupt information for devices
-- 
1.5.1

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Reply via email to