On 7/9/07, Stuart Yoder <[EMAIL PROTECTED]> wrote: > > document level and sense information for the Freescale > IPIC interrupt controller > > +Sense and level information follows the Linux convention > +(specified in include/linux/interrupt.h) and should be encoded > +as follows: > + > + 2 = high to low edge sensitive type enabled > + 8 = active low level sensitive type enabled > +
... but it is probably worthwhile commentting that sense types 1 & 4 are not supported; just to fill in the obvious gaps. :-) g. -- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. [EMAIL PROTECTED] (403) 399-0195 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
