On Fri, Aug 03, 2012 at 09:51:34AM +0200, Kosa Attila wrote:
>
> A kovetkezoket irtam a /etc/default/grub fajlba (utana volt
> update-grub):
> GRUB_CMDLINE_LINUX="ipv6.disable=1 xen-pciback.passthrough=1
> xen-pciback.permissive xen-pciback.hide=(03:00.0)
> pci=resource_alignment=03:00.0"
> GRUB_CMDLINE_XEN_DEFAULT="dom0_mem=256M"
Ide beirtam az iommu=1 opciot is, de ugyanugy ezt mondta:
> # xm dmesg | grep IO
> (XEN) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
> (XEN) AMD-Vi: IOMMU not found!
> (XEN) ENABLING IO-APIC IRQs
A dom0 logjaban ez szerepel:
Aug 3 10:20:58 g95 kernel: [ 626.114943] alloc irq_desc for 738 on node -1
Aug 3 10:20:58 g95 kernel: [ 626.114948] alloc kstat_irqs on node -1
Aug 3 10:20:58 g95 kernel: [ 626.126046] pciback 0000:03:00.0: Driver tried
to write to a read-only configuration space field at offset 0x4a, size 2. This
may be harmless, but if you have problems with your device:
Aug 3 10:20:58 g95 kernel: [ 626.126051] 1) see permissive attribute in sysfs
Aug 3 10:20:58 g95 kernel: [ 626.126053] 2) report problems to the xen-devel
mailing list along with details of your device obtained from lspci.
Aug 3 10:20:58 g95 kernel: [ 626.373221] pciback 0000:03:00.0: enabling
device (0000 -> 0002)
Aug 3 10:20:58 g95 kernel: [ 626.373238] xen: registering gsi 19 triggering 0
polarity 1
Aug 3 10:20:58 g95 kernel: [ 626.373245] xen_allocate_pirq: returning irq 19
for gsi 19
Aug 3 10:20:58 g95 kernel: [ 626.373250] xen: --> irq=19
Aug 3 10:20:58 g95 kernel: [ 626.373258] Already setup the GSI :19
Aug 3 10:20:58 g95 kernel: [ 626.373263] pciback 0000:03:00.0: PCI INT A ->
GSI 19 (level, low) -> IRQ 19
Aug 3 10:20:58 g95 kernel: [ 626.373465] pciback 0000:03:00.0: setting
latency timer to 64
Aug 3 10:20:58 g95 kernel: [ 626.382524] blkback: ring-ref 9, event-channel
9, protocol 1 (x86_64-abi)
Aug 3 10:20:58 g95 kernel: [ 626.382700] alloc irq_desc for 737 on node -1
Aug 3 10:20:58 g95 kernel: [ 626.382703] alloc kstat_irqs on node -1
Aug 3 10:20:58 g95 kernel: [ 626.408392] blkback: ring-ref 10, event-channel
10, protocol 1 (x86_64-abi)
Aug 3 10:20:58 g95 kernel: [ 626.408564] alloc irq_desc for 736 on node -1
Aug 3 10:20:58 g95 kernel: [ 626.408567] alloc kstat_irqs on node -1
Aug 3 10:20:58 g95 kernel: [ 626.433705] blkback: ring-ref 11, event-channel
11, protocol 1 (x86_64-abi)
Aug 3 10:20:58 g95 kernel: [ 626.433921] alloc irq_desc for 735 on node -1
Aug 3 10:20:58 g95 kernel: [ 626.433924] alloc kstat_irqs on node -1
Aug 3 10:20:58 g95 kernel: [ 626.458847] blkback: ring-ref 12, event-channel
12, protocol 1 (x86_64-abi)
Aug 3 10:20:58 g95 kernel: [ 626.459023] alloc irq_desc for 734 on node -1
Aug 3 10:20:58 g95 kernel: [ 626.459026] alloc kstat_irqs on node -1
Aug 3 10:20:58 g95 kernel: [ 626.484289] blkback: ring-ref 13, event-channel
13, protocol 1 (x86_64-abi)
Aug 3 10:20:58 g95 kernel: [ 626.484464] alloc irq_desc for 733 on node -1
Aug 3 10:20:58 g95 kernel: [ 626.484467] alloc kstat_irqs on node -1
Aug 3 10:20:58 g95 kernel: [ 626.515406] blkback: ring-ref 14, event-channel
14, protocol 1 (x86_64-abi)
Aug 3 10:20:58 g95 kernel: [ 626.515580] alloc irq_desc for 732 on node -1
Aug 3 10:20:58 g95 kernel: [ 626.515584] alloc kstat_irqs on node -1
Aug 3 10:20:58 g95 kernel: [ 626.543582] blkback: ring-ref 15, event-channel
15, protocol 1 (x86_64-abi)
Aug 3 10:20:58 g95 kernel: [ 626.543765] alloc irq_desc for 731 on node -1
Aug 3 10:20:58 g95 kernel: [ 626.543768] alloc kstat_irqs on node -1
Aug 3 10:21:01 g95 kernel: [ 629.284439] alloc irq_desc for 730 on node -1
Aug 3 10:21:01 g95 kernel: [ 629.284444] alloc kstat_irqs on node -1
Aug 3 10:26:18 g95 kernel: [ 946.256154] pciback 0000:03:00.0: PCI INT A
disabled
Probalkoztam ezzel is (a dom0-ban):
# echo 0000:03:00.0 > /sys/bus/pci/drivers/pciback/permissive
De ennek hatasara sem mukodik a halokartya a domU-ban (ami
szinten Debian Squeeze). Termeszetesen az echo parancs utan
inditottam a domU-t.
Ez sem igazan biztato:
# lspci -vv | egrep -i flreset
ExtTag+ RBE+ FLReset-
ExtTag+ RBE+ FLReset-
ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 107
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4800+
stepping : 2
cpu MHz : 2511.458
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu de tsc msr pae mce cx8 apic mtrr mca cmov pat clflush mmx
fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up rep_good
extd_apicid pni cx16 hypervisor lahf_lm cmp_legacy extapic cr8_legacy
3dnowprefetch
bogomips : 5022.91
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc 100mhzsteps
Letehetek arrol, hogy ez mukodni fog?
--
Udvozlettel
Zsiga
_________________________________________________
linux lista - [email protected]
http://mlf2.linux.rulez.org/mailman/listinfo/linux
