The USB PHYs should be requested only once during the life cycle of
this driver.
As dwc3_core_init() is called during system suspend/resume
it will result in multiple calls to dwc3_core_get_phy() which is wrong.
To prevent that let's move dwc3_core_get_phy() call
outside dwc3_core_init().
Fixes: 541768b08a4 ("usb: dwc3: core: Call dwc3_core_get_phy() before
initializing phys")
Cc: linux-stable <sta...@vger.kernel.org> # >= v4.13
Signed-off-by: Roger Quadros <rog...@ti.com>
---
drivers/usb/dwc3/core.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 0783250..1274251 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -722,8 +722,6 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc)
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
}
-static int dwc3_core_get_phy(struct dwc3 *dwc);
-
/**
* dwc3_core_init - Low-level initialization of DWC3 Core
* @dwc: Pointer to our controller context structure
@@ -754,10 +752,6 @@ static int dwc3_core_init(struct dwc3 *dwc)
dwc->maximum_speed = USB_SPEED_HIGH;
}
- ret = dwc3_core_get_phy(dwc);
- if (ret)
- goto err0;
-
ret = dwc3_core_soft_reset(dwc);
if (ret)
goto err0;
@@ -1177,6 +1171,10 @@ static int dwc3_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dwc);
dwc3_cache_hwparams(dwc);
+ ret = dwc3_core_get_phy(dwc);
+ if (ret)
+ goto err0;
+
spin_lock_init(&dwc->lock);
pm_runtime_set_active(dev);
--
cheers,
-roger
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
