On 10/24/2017 1:33 AM, John Stultz wrote:
> It has been noticed that the dwc2 udc state reporting doesn't
> seem to work (at least on HiKey boards). Where after the initial
> setup, the sysfs /sys/class/udc/f72c0000.usb/state file would
> report "configured" no matter the state of the OTG port.
>
> This patch adds a call so that we report to the UDC layer when
> the gadget device is disconnected.
>
> This patch does depend on the previous patch ("usb: dwc2:
> Improve gadget state disconnection handling") in this patch set
> in order to properly work.
>
> Cc: Wei Xu <xuw...@hisilicon.com>
> Cc: Guodong Xu <guodong...@linaro.org>
> Cc: Amit Pundir <amit.pun...@linaro.org>
> Cc: YongQin Liu <yongqin....@linaro.org>
> Cc: John Youn <johny...@synopsys.com>
> Cc: Minas Harutyunyan <minas.harutyun...@synopsys.com>
> Cc: Douglas Anderson <diand...@chromium.org>
> Cc: Chen Yu <cheny...@huawei.com>
> Cc: Felipe Balbi <felipe.ba...@linux.intel.com>
> Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
> Cc: linux-usb@vger.kernel.org
> Tested by: Minas Harutyunyan <hmi...@synopsys.com>
> Reported-by: Amit Pundir <amit.pun...@linaro.org>
> Signed-off-by: John Stultz <john.stu...@linaro.org>
> ---
> drivers/usb/dwc2/gadget.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
> index 7fd0e38..603c216 100644
> --- a/drivers/usb/dwc2/gadget.c
> +++ b/drivers/usb/dwc2/gadget.c
> @@ -3202,6 +3202,8 @@ void dwc2_hsotg_disconnect(struct dwc2_hsotg *hsotg)
>
> call_gadget(hsotg, disconnect);
> hsotg->lx_state = DWC2_L3;
> +
> + usb_gadget_set_state(&hsotg->gadget, USB_STATE_NOTATTACHED);
> }
>
> /**
>
Acked-by: Minas Harutyunyan <hmi...@synopsys.com>
Tested-by: Minas Harutyunyan <hmi...@synopsys.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
