On Thu, Aug 31, 2017 at 02:51:40PM +0200, Nicolas Ferre wrote:
> The driver triggers actions on both edges of the vbus signal.
>
> The former PIO controller was triggering IRQs on both falling and rising edges
> by default. Newer PIO controller don't, so it's better to set it explicitly to
> IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING.
>
> Without this patch we may trigger the connection with host but only on some
> bouncing signal conditions and thus lose connecting events.
>
> Signed-off-by: Nicolas Ferre <nicolas.fe...@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroc...@microchip.com>
> Cc: stable <sta...@vger.kernel.org> # v4.4+
> ---
> drivers/usb/gadget/udc/atmel_usba_udc.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c
> b/drivers/usb/gadget/udc/atmel_usba_udc.c
> index 98d71400f8a1..a884c022df7a 100644
> --- a/drivers/usb/gadget/udc/atmel_usba_udc.c
> +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
> @@ -29,6 +29,8 @@
> #include <linux/of_gpio.h>
>
> #include "atmel_usba_udc.h"
> +#define USBA_VBUS_IRQFLAGS (IRQF_ONESHOT \
> + | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING)
>
> #ifdef CONFIG_USB_GADGET_DEBUG_FS
> #include <linux/debugfs.h>
> @@ -2361,7 +2363,7 @@ static int usba_udc_probe(struct platform_device *pdev)
> IRQ_NOAUTOEN);
> ret = devm_request_threaded_irq(&pdev->dev,
> gpio_to_irq(udc->vbus_pin), NULL,
> - usba_vbus_irq_thread, IRQF_ONESHOT,
> + usba_vbus_irq_thread,
> USBA_VBUS_IRQFLAGS,
> "atmel_usba_udc", udc);
> if (ret) {
> udc->vbus_pin = -ENODEV;
> --
> 2.9.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
