A USB root-hub may have several PHYs which need to be configured before
the root-hub starts working.
This adds the documentation for such a USB root-hub.
Signed-off-by: Martin Blumenstingl <martin.blumensti...@googlemail.com>
---
.../devicetree/bindings/usb/usb-roothub.txt | 46 ++++++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/usb-roothub.txt
diff --git a/Documentation/devicetree/bindings/usb/usb-roothub.txt
b/Documentation/devicetree/bindings/usb/usb-roothub.txt
new file mode 100644
index 000000000000..fc0797d7cee9
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-roothub.txt
@@ -0,0 +1,46 @@
+Generic USB root-hub Properties
+
+similar to the USB device bindings (documented in usb-device.txt from the
+current directory) this provides support for configuring the root-hub.
+
+Required properties:
+- compatible: should be at least one of "usb1d6b,3", "usb1d6b,2"
+- reg: must be 0.
+- address-cells: must be 1
+- size-cells: must be 0
+
+Required sub-nodes:
+a sub-node per actual USB port is required. each sub-node supports the
+following properties:
+ Required properties:
+ - reg: the port number on the root-hub (mandatory)
+ Optional properties:
+ - phys: optional, from the *Generic PHY* bindings (mandatory needed
+ when phy-names is given)
+ - phy-names: optional, from the *Generic PHY* bindings; supported names
+ are "usb2-phy" or "usb3-phy"
+
+Example:
+ &usb1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ roothub@0 {
+ compatible = "usb1d6b,3", "usb1d6b,2";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ port@1 {
+ reg = <1>;
+ phys = <&usb2_phy1>, <&usb3_phy1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+
+ port@2 {
+ reg = <2>;
+ phys = <&usb2_phy2>, <&usb3_phy2>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+ }
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
