In the ene_usb6250 sub-driver for usb-storage, there is no support for
the REQUEST SENSE command. This command is issued whenever a failure
occurs, and without it the driver has no way to tell the SCSI core
what the reason for the failure was.
This patch adds a do_scsi_request_sense() routine to the driver. The
new routine reports the error code stored by the previous command.
Signed-off-by: Alan Stern <st...@rowland.harvard.edu>
Reported-and-tested-by: Andreas Hartmann <andihartm...@01019freenet.de>
---
[as1829]
drivers/usb/storage/ene_ub6250.c | 41 +++++++++++++++++++++++++++++++--------
1 file changed, 33 insertions(+), 8 deletions(-)
Index: usb-4.x/drivers/usb/storage/ene_ub6250.c
===================================================================
--- usb-4.x.orig/drivers/usb/storage/ene_ub6250.c
+++ usb-4.x/drivers/usb/storage/ene_ub6250.c
@@ -95,12 +95,12 @@ static struct us_unusual_dev ene_ub6250_
#define REG_HW_TRAP1 0xFF89
/* SRB Status */
-#define SS_SUCCESS 0x00 /* No Sense */
-#define SS_NOT_READY 0x02
-#define SS_MEDIUM_ERR 0x03
-#define SS_HW_ERR 0x04
-#define SS_ILLEGAL_REQUEST 0x05
-#define SS_UNIT_ATTENTION 0x06
+#define SS_SUCCESS 0x000000 /* No Sense */
+#define SS_NOT_READY 0x023A00 /* Medium not present */
+#define SS_MEDIUM_ERR 0x031100 /* Unrecovered read error */
+#define SS_HW_ERR 0x040800 /* Communication failure */
+#define SS_ILLEGAL_REQUEST 0x052000 /* Invalid command */
+#define SS_UNIT_ATTENTION 0x062900 /* Reset occurred */
/* ENE Load FW Pattern */
#define SD_INIT1_PATTERN 1
@@ -584,6 +584,22 @@ static int ene_send_scsi_cmd(struct us_d
return USB_STOR_TRANSPORT_GOOD;
}
+static int do_scsi_request_sense(struct us_data *us, struct scsi_cmnd *srb)
+{
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+ unsigned char buf[18];
+
+ memset(buf, 0, 18);
+ buf[0] = 0x70; /* Current error */
+ buf[2] = info->SrbStatus >> 16; /* Sense key */
+ buf[7] = 10; /* Additional length */
+ buf[12] = info->SrbStatus >> 8; /* ASC */
+ buf[13] = info->SrbStatus; /* ASCQ */
+
+ usb_stor_set_xfer_buf(buf, sizeof(buf), srb);
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
static int sd_scsi_test_unit_ready(struct us_data *us, struct scsi_cmnd *srb)
{
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
@@ -2227,11 +2243,13 @@ static int sd_scsi_irp(struct us_data *u
int result;
struct ene_ub6250_info *info = (struct ene_ub6250_info *)us->extra;
- info->SrbStatus = SS_SUCCESS;
switch (srb->cmnd[0]) {
case TEST_UNIT_READY:
result = sd_scsi_test_unit_ready(us, srb);
break; /* 0x00 */
+ case REQUEST_SENSE:
+ result = do_scsi_request_sense(us, srb);
+ break; /* 0x03 */
case INQUIRY:
result = sd_scsi_inquiry(us, srb);
break; /* 0x12 */
@@ -2257,6 +2275,8 @@ static int sd_scsi_irp(struct us_data *u
result = USB_STOR_TRANSPORT_FAILED;
break;
}
+ if (result == USB_STOR_TRANSPORT_GOOD)
+ info->SrbStatus = SS_SUCCESS;
return result;
}
@@ -2267,11 +2287,14 @@ static int ms_scsi_irp(struct us_data *u
{
int result;
struct ene_ub6250_info *info = (struct ene_ub6250_info *)us->extra;
- info->SrbStatus = SS_SUCCESS;
+
switch (srb->cmnd[0]) {
case TEST_UNIT_READY:
result = ms_scsi_test_unit_ready(us, srb);
break; /* 0x00 */
+ case REQUEST_SENSE:
+ result = do_scsi_request_sense(us, srb);
+ break; /* 0x03 */
case INQUIRY:
result = ms_scsi_inquiry(us, srb);
break; /* 0x12 */
@@ -2292,6 +2315,8 @@ static int ms_scsi_irp(struct us_data *u
result = USB_STOR_TRANSPORT_FAILED;
break;
}
+ if (result == USB_STOR_TRANSPORT_GOOD)
+ info->SrbStatus = SS_SUCCESS;
return result;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
